Internet Connection loss after minutes in OneMesh / EasyMesh

Internet Connection loss after minutes in OneMesh / EasyMesh

Internet Connection loss after minutes in OneMesh / EasyMesh
Internet Connection loss after minutes in OneMesh / EasyMesh
2024-11-14 08:06:30 - last edited 3 weeks ago
Hardware Version:
Firmware Version:

Hi,

 

- Using Archer VR2100v as DSL Modem --> works fine

 

- Want to use Archer AX55 to extend Wifi in other rooms --> I connected AX55 via WPS with Archer VR2100v --> They are in same OneMesh now wired via ethernetcable

 

Problem: After couple of minutes AX55 losing connection to Internet (Internet LED orange). VR2100v is not losing connection to Internet. When plug out / plug in ethernetcable in AX55 Internet works for few minutes, then loses connection.

 

I have updated everything and resetted it but its not working.

 

Best

René

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Internet Connection loss after minutes in OneMesh / EasyMesh-Solution
2024-11-14 19:43:30 - last edited 3 weeks ago

  @DonRon 

 

Since VR2100v supports only Onemesh feature, you have two options here:

1. Use both devices in mesh but connected wirelessly (unplug the thernet cable between them).

2. If you need VR2100v and AX55 connected by an etehrnet cable, just set the AX55 in AP mode.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Internet Connection loss after minutes in OneMesh / EasyMesh-Solution
2024-11-14 19:43:30 - last edited 3 weeks ago

  @DonRon 

 

Since VR2100v supports only Onemesh feature, you have two options here:

1. Use both devices in mesh but connected wirelessly (unplug the thernet cable between them).

2. If you need VR2100v and AX55 connected by an etehrnet cable, just set the AX55 in AP mode.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options