Just another "fixed IP not working" thread
As you can clearly see in my first pic, assigning MAC based IPs in OC200 with the ER707-M2 v1.20 router is definetly hit and miss. I have a very basic network and most clients do get the expected IP - all ethernet wired, all same and only (main)VLAN. But this device (my 3d printer) has had enough with the assigned IP and decided to go for another one. I tried to reset/release/renew/refresh 100 times to no avail. Tried to delete and readd, tried to erase from known devices, I think I tried everything. My MAC is correct. DHCP enabled on printer. DHCP pool includes my "to be" reservation. No MAC IP binding. Apparently other folks have shared my frustration but I think it got solved with a FW update eventually, However, I am on last update both on my OC200 and my ER707. So if any more technically enclined than me feel to chip in, I would very much appreciate it. Better yet, if any TPLink tech has a solution to my problem, I am all ears - well, eyes.Please help.
@Vincent-TP Unfortunately it is not. The printer is a Neptune 4 Pro but that is irrelevant as many clients get erroneous IP (not the reserved/intended one). Below is a screenshot of a Tuya relay that is wireless, for instance. Also, they don't seem to keep the same IP anyway, it gets refreshed with another one on a random basis, but not with the reserved one (that one simply won't stick). So the fault is definitely not on the client side. There are no other DHCP capable devices in the LAN, by the way, so no conflict.
@Clive_A I have meanwhile discovered at least 5 more devices that do not get the desired IP. These are non-vital IoT devices so I never checked because they work anyway. But still. This is part of a larger problem. I honestly hope I am doing something wrong myself, even though there is not much to get wrong. I even tried untcking the static ip box and deleting my clients and re-adding them with the reservations did from scratch via the Services > DHCP > New reservation meniu. I restarted the clients to force a release/refresh. Same result.
Anyway, the files are attached as per your instructions.
