slow speed on deco x50 5g
Hi,
I bought deco x50 5g from amazon uk, using lyca sim card(lyca using ee) with unlimited boadband, but my internet speed are up to 50Mbps on my phone, and on my pc connected to lan cable are up to 20Mbps with ping on both devices up to 180ms. What I tried so far, when I got modem, it was 1.1.5 sw version, Updated it to 1.1.7, but everything went worse, so had to go back to 1.1.5. when I log in to http://tplinkdeco.net/ and go to advanced/system/system logs there's loads of errors. If you need log i can provide. it is only on 5G, 5GHz and 160MHz. Tried QoS, no changes. Router/modem placed on a window, nothing obstructing it. is it possible to do something about it?I can't believe that's gonna be speed of 5G, even my phone can do 30ms ping with 150Mbps download. there's some of the logs:
Wed Jan 1 17:18:33 2025 daemon.err nrd[10704]: wlanifMapToBandwidth: Invalid bandwidth from driver: 3
Wed Jan 1 17:18:34 2025 daemon.err nrd[10704]: wlanifMapToBandwidth: Invalid bandwidth from driver: 3
Wed Jan 1 17:18:34 2025 user.warn : [mobile] [GetEventType] qmi_module=1, qmi_msg_id=0x0051
Wed Jan 1 17:18:34 2025 user.warn : [mobile] [PostEvent] Event (id: 0x00000000, type: 0x10000001) return directly.
Wed Jan 1 17:18:35 2025 daemon.err nrd[10704]: wlanifMapToBandwidth: Invalid bandwidth from driver: 3
Wed Jan 1 17:18:36 2025 daemon.err nrd[10704]: wlanifMapToBandwidth: Invalid bandwidth from driver: 3
Wed Jan 1 17:19:51 2025 user.err : [fan-control]:at_cmd = :simplecom -c at+qtemp
Wed Jan 1 17:19:51 2025 user.err : [fan-control]:atResp = :at+qtemp
+QTEMP:"modem-lte-sub6-pa1","47"
+QTEMP:"modem-sdr0-pa0","0"
+QTEMP:"modem-sdr0-pa1","0"
+QTEMP:"modem-sdr0-pa2","0"
+QTEMP:"modem-sdr1-pa0","0"
+QTEMP:"modem-sdr1-pa1","0"
+QTEMP:"modem-sdr1-pa2","0"
+QTEMP:"modem-mmw0","0"
+QTEMP:"aoss-0-usr","48"
+QTEMP:"cpuss-0-usr","48"
Thanks,
Gytis
So I did so testing around. what I noticed that, when you change from 4G to 5G it gives you almost perfect setting, but there's a problem, you can't use band N78 when you try to lock in cell. it gives you only N1 if you try to put N78 it gives error on NRARFCN that it is (invalid. value not between 620000 and 653332) and you need to change carrier manually to EE Internet not EE. BUT when you choose EE it will let you change to band N78 and gives no error, but settings are worse. so after alot of testings my I had to do everything manually and so far i got best best ping, speed not best, but i hope you can help me. I will upload some screenshots from deco app with all settings. when I changed manually Mobile ISP to EEInternet APN Type you can choose only dynamic or static.
