RV20 Mop Spinning In the same place
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RV20 Mop Spinning In the same place
Tags:
#Map
Hi, everyone
I bought the Rv20 Mop plus about three Months ago. Since then it has been cleaning every day without any problems using the same pattern and the same map. Since yesterday, it has been spinning and moving same pace
1 Accepted Solution
Re:RV20 Mop Spinning In the same place-Solution
Try the following steps, see if that helps. What's the firmware version of this device? Make sure it is updated.
1. Wipe the LiDAR sensor dry with a clean cotton cloth.
2. Restart the robot vacuum by switching its side ON/OFF button.
▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter
▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub
▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes
▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Re:RV20 Mop Spinning In the same place-Solution
Try the following steps, see if that helps. What's the firmware version of this device? Make sure it is updated.
1. Wipe the LiDAR sensor dry with a clean cotton cloth.
2. Restart the robot vacuum by switching its side ON/OFF button.
▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter
▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub
▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes
▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!