Home Network Community > DSL Modem Routers > SIP-Telefon an Archer VR2800v
< DSL Modem Routers

SIP-Telefon an Archer VR2800v

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

SIP-Telefon an Archer VR2800v

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SIP-Telefon an Archer VR2800v
SIP-Telefon an Archer VR2800v
2025-02-28 18:51:32 - last edited 2025-04-09 07:24:05
Tags: #VoIP #Network Connectivity #Installation
Model: Archer VR2800v  
Hardware Version: V1
Firmware Version: 1.2.0 0.9.1 v006d.0 Build 180410 Rel.61139n

Hallo,

 

kann man ein SIP-Telefon mit dem VR2800v verbinden? Also Telefonie zwischen den DECT-Telefonen und dem SIP-Telefon und nach extern? Wenn Ja, gibt es eine Anleitung?

 

Danke und schönes Wochenende

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:SIP-Telefon an Archer VR2800v-Solution
2025-03-19 08:09:12 - last edited 2025-04-09 07:24:05

  @Rudelbert 

 

Hi, welcome to our community.

Yes, it is possible to connect a SIP phone to the VR2800v. Archer VR2800v supports VoIP and SIP, so you can integrate SIP phones into your network.

First, make sure you have a SIP account which is provided by your VoIP provider.

Then you may refer to the guide to configure and troubleshoot if the registration fails: How to setup my VoIP function on VoIP Modem Router
If your DECT phones are also connected to the VR2800v, they can normally communicate with each other and also make external calls as long as the SIP account is set up correctly.

It is also suggested to contact local technical support for direct help.

Thank you and best regards.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:SIP-Telefon an Archer VR2800v-Solution
2025-03-19 08:09:12 - last edited 2025-04-09 07:24:05

  @Rudelbert 

 

Hi, welcome to our community.

Yes, it is possible to connect a SIP phone to the VR2800v. Archer VR2800v supports VoIP and SIP, so you can integrate SIP phones into your network.

First, make sure you have a SIP account which is provided by your VoIP provider.

Then you may refer to the guide to configure and troubleshoot if the registration fails: How to setup my VoIP function on VoIP Modem Router
If your DECT phones are also connected to the VR2800v, they can normally communicate with each other and also make external calls as long as the SIP account is set up correctly.

It is also suggested to contact local technical support for direct help.

Thank you and best regards.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 155

Replies: 1

Tags

VoIP Network Connectivity Installation
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.