TP-Link Community > Tapo Smart Plug > Tapo P110 using extension lead, reading same regardless of number of appliances
< Tapo Smart Plug

Tapo P110 using extension lead, reading same regardless of number of appliances

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tapo P110 using extension lead, reading same regardless of number of appliances

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tapo P110 using extension lead, reading same regardless of number of appliances
Tapo P110 using extension lead, reading same regardless of number of appliances
2025-03-08 08:06:46 - last edited 2025-04-02 08:28:04
Model: Tapo P110  
Hardware Version:
Firmware Version:

I had a power bank plugged into the P110 with an AV receiver, and the TV and Sky box running through it showing around 180 watts of power usage (which is the high end rating of the TV) , when I put everything in standby then switch on the AV it's drawing 60W,however I reconnected everything bypassing the receiver and still when in standby the TV and Sky are still showing the same, any ideas, wasn't reading the 60W in the first place?

Thanks in advance 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Tapo P110 using extension lead, reading same regardless of number of appliances -Solution
2025-03-10 09:59:26 - last edited 2025-04-02 08:28:04

  @Lolhare 

 

There are safe hazards using the Tapo P110 smart plug to control multiple appliances with a power strip (same for the power bank, especially the connected devices are running at the same time). This might also affect the accuracy of the energy monitoring feature.

 

Connect only one appliance to the smart plug and check the data again. 

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Tapo P110 using extension lead, reading same regardless of number of appliances -Solution
2025-03-10 09:59:26 - last edited 2025-04-02 08:28:04

  @Lolhare 

 

There are safe hazards using the Tapo P110 smart plug to control multiple appliances with a power strip (same for the power bank, especially the connected devices are running at the same time). This might also affect the accuracy of the energy monitoring feature.

 

Connect only one appliance to the smart plug and check the data again. 

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 560

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.