TP-Link Community > Tapo Smart Camera > Loop recording problem
< Tapo Smart Camera

Loop recording problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Loop recording problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Loop recording problem
Loop recording problem
2025-05-26 23:27:10 - last edited 2025-07-23 06:40:26
Tags: #Recording
Model: Tapo C500   Tapo C520WS  
Hardware Version: V1
Firmware Version: 1.3.5

Hi,

Every time the camcera records video, the capacity of the SD card is exceeded, the loop recording does not work and the previous recordings are not available. From that point there is no any new records and can't download the old recordings. The only way to make it work again to format the SD and lost everything. Is there a solution to solve this? I have TAPO 500 and TAPO C520WS both have the same problem. 

Best Regards,

Misi

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Loop recording problem -Solution
2025-05-27 10:06:37 - last edited 2025-07-23 06:40:26

  @DMisi 

 

Please verify the quality of the mircoSD card you use. A low-quality SD card can cause a range of operational problems. You can refer to this article for guidance on how to test it. How to Verify Fake Micro SD Cards Share the test result here, we can help to check it.

 

What are the hardware and firmware versions of your cameras? What SD card do you use? Do both camera use the same sd card?

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Loop recording problem -Solution
2025-05-27 10:06:37 - last edited 2025-07-23 06:40:26

  @DMisi 

 

Please verify the quality of the mircoSD card you use. A low-quality SD card can cause a range of operational problems. You can refer to this article for guidance on how to test it. How to Verify Fake Micro SD Cards Share the test result here, we can help to check it.

 

What are the hardware and firmware versions of your cameras? What SD card do you use? Do both camera use the same sd card?

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 561

Replies: 1

Tags

Recording
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.