W8961-ND Can't open any ports

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

W8961-ND Can't open any ports

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
W8961-ND Can't open any ports
W8961-ND Can't open any ports
2015-09-10 05:11:00
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Ive been trying to open ports (11100) in order to host a game (I used this website to help http://portforward.com/english/routers/port_forwarding/TP-Link/TD-8961ND/Risk_of_Rain.htm ), after forwarding the port on the router page the game didnt work, so I used a port checker and It said the port I'd just opened was closed. I tried opening different ports but no matter what I open the sites say it remains closed. Is there some step im missing? Ive assigned a static IP to my pc (that is what I should enter in the Local IP address field right?) and tried disabling my firewall but the ports apparently remain closed
  0      
  0      
#1
Options
3 Reply
Re:W8961-ND Can't open any ports
2015-09-14 16:32:36
Did you try DMZ and check if the game works or not?
What's the hardware version and firmware version of your W8961?
  0  
  0  
#2
Options
Re:W8961-ND Can't open any ports
2021-05-19 03:06:56

@M Diamond 

So i have the tplink mr6400 v5 4g i configured a  windows server 2008 r2 webserver port 80 Internet Information services  & remote desktop connection port 3389 doesnt work over internet external  public ip address then internal private  ipaddress only private ip work single ip address LAN working i cannot access anywhere over internet pubic ip adress

Normally i would access my pc from outside my house with my modem.

Now i wanna setup remote desktop connection and it doesn't work.

I used the right external and internal port for remote desktop (3389) and the ip of the pc i wanted to access.

But when i wanna acces it with my ip form my isp it cant connect to it.

It does work locally when I type the external public  IP address from the tplink mr6400 4g router  currently firmware v5 

If i check it of the port is open, i see its closed on overy ip adress that . https://gyazo.com/d66aec2b7541a238c55c75a9402aa7c3

This is my setup; the tplink mr6400 v5  4g router is connected to my modem and from  tplink mr6400 v5 Ethernet  connected to my windows server 2008 R2

  0  
  0  
#3
Options
Re:W8961-ND Can't open any ports
2021-05-20 07:31:23

@Jitheshvaz 

Hi, I do have the following questions and hope you could help me figure them out;

1. Did TL-MR6400 v5 work on the wireless router mode, no longer use the SIM card?

2. In the local network of Archer MR6400, you could access the server via an external IP address or MR6400 +port 80, right?

--if yes, the port is supposed to be opened correctly;

3.As for your network modem, is it a modem-router combo?

--Is the internet public IP address the same as the external IP address of the TL-MR6400?

 

Thank you very much.

 

 

 

 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 633

Replies: 3