firmware update buggy #2
firmware update buggy #2
Since the firmware auto-updated earlier this week, I have had a totally unstable and unusable wi-fi network. Constant reboots, and rarely last 30 minutes. Often the wi-fi network it is not possible to join the network at all.
setup
Cable modem (modem mode) <-- QNAP QHora-301-W router (wi-fi disabled) <-- Study (main - hardwired)
Study <--preferred-- Bedroom <--preferred-- Loft
Study <--preferred-- Dining Room <--preferred-- Kitchen
Study <--preferred-- Bedroom <--preferred-- Loft
Study <--preferred-- Dining Room <--preferred-- Kitchen
On the rare occasions it has been correct, the topology should be this:
and randomly:
but is frequently this:
or this:
since the update i have seen almost permanent 100% cpu activity on the main unit.
eventually the main unit will reboot automatically quite randomly (green->yellow->green). rinse and repeat
all hardwired devices on the network are okay, only wireless is affected.
often times it is difficult to access the web interface, even if the app is logged out (learnt that the hard way)
i did manage to capture the logs at an earlier point in time. there was some reference to a WPS pin required for a Sky Q mini box. i have now turned that device off.
i will attach the old log if i can. i cannot get a new log currently.
-paul
Re:firmware update buggy #2
expected topology from first post
Re:firmware update buggy #2
status page from first post
