Home Network Community > Deco > x50 and connecting another deco m4 devices ?
< Deco

x50 and connecting another deco m4 devices ?

x50 and connecting another deco m4 devices ?

x50 and connecting another deco m4 devices ?
x50 and connecting another deco m4 devices ?
2025-07-16 06:32:55 - last edited 2025-08-06 09:06:06
Tags: #Installation #Connection Preference
Model: Deco X50  
Hardware Version: V1
Firmware Version:

Hi 

 

Im having a setup that X50 set as the main aps , but i need to get internet connection into the yard as well , did see the m4 2 pack as a quick solution , ive got wired lancable to the point where i can place the m4 ap , will this work ? 

 

I know that the speed will be lower in the m4 ap , but can live with that , not many devices will be connected to that ap as i need to connect a few IOT devices to it

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:x50 and connecting another deco m4 devices ?-Solution
2025-07-17 08:36:17 - last edited 2025-08-06 09:06:06

  @dunkers Hi, welcome to the community.

Deco M4 would work well with Deco X50:Can different Deco models work together?

 

There is a potential concern when using mixed models. If an advanced feature requires the support of all Deco units in the Mesh, such as WiFi Access Control/Allow List, it will disappear from the Deco when Deco M4 is added. So, compared with Deco M4, Deco X10 or the same model Deco X50 would be better options.

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:x50 and connecting another deco m4 devices ?-Solution
2025-07-17 08:36:17 - last edited 2025-08-06 09:06:06

  @dunkers Hi, welcome to the community.

Deco M4 would work well with Deco X50:Can different Deco models work together?

 

There is a potential concern when using mixed models. If an advanced feature requires the support of all Deco units in the Mesh, such as WiFi Access Control/Allow List, it will disappear from the Deco when Deco M4 is added. So, compared with Deco M4, Deco X10 or the same model Deco X50 would be better options.

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 278

Replies: 1

Tags

Installation Connection Preference
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.