Home Network Community > Deco > Missing Captive Portal Option
< Deco

Missing Captive Portal Option

Missing Captive Portal Option

Missing Captive Portal Option
Missing Captive Portal Option
2025-07-18 10:41:49 - last edited 2025-07-29 09:54:00
Tags: #Deco App Related #Wi-Fi Access Control #Guest Network #Captive Portal
Model: Deco XE75 Pro  
Hardware Version:
Firmware Version: 1.2.14 Build 20241223 Rel. 16551

Hello,

 

I am looking to enable the Captive Portal option for my guest network, but I don't see the option. My network consists of a main XE75 Pro (Firmware: 1.2.14 Build 20241223 Rel. 16551), as well as 2 other XE75 Pro connected to it (Firmware: 1.2.14 Build 20241223 Rel. 16551), as well as an X50-PoE (Firmware: 1.4.9 Build 20250110 Rel. 65349), and a BE25 (Firmware: 1.0.17 Build 20250403 Rel 13304).

 

I only need the guest network on the XE75Pro units, so if it's because I have other units, is it possible to have those broadcast a different SSID or something like that? I'm using the X50 in the garage for some smart devices, and the BE25 to bring some Ethernet ports to my TV area.

 

Thanks,

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Missing Captive Portal Option-Solution
2025-07-29 09:53:55 - last edited 2025-07-29 09:54:00

  @GenericUser 

Hi, thank you very much for your time and patience.

The current firmware of Deco XE75/75 Pro, as well as Deco BE25, doesn't support Captive Portal Option under the Guest network.(Deco X50-POE does)

I think you can try to enable the IOT network:

TP-Link IoT Network

 

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Missing Captive Portal Option-Solution
2025-07-29 09:53:55 - last edited 2025-07-29 09:54:00

  @GenericUser 

Hi, thank you very much for your time and patience.

The current firmware of Deco XE75/75 Pro, as well as Deco BE25, doesn't support Captive Portal Option under the Guest network.(Deco X50-POE does)

I think you can try to enable the IOT network:

TP-Link IoT Network

 

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  1  
  1  
#2
Options
Re:Missing Captive Portal Option
2025-08-05 05:47:15

  @David-TP Thank you for your reply. I'm confused as to how a "higher end" router is missing features that a lower end router supports? Why is there no clear article which specifies which router supports the feature? Will this feature come to the XE75 Pro?

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 351

Replies: 2

Tags

Deco App Related Wi-Fi Access Control Guest Network
Captive Portal
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.