Home Network Community > Deco > Deco X1500 wont connect devices
< Deco

Deco X1500 wont connect devices

Deco X1500 wont connect devices

Deco X1500 wont connect devices
Deco X1500 wont connect devices
2025-08-04 07:05:14 - last edited 2025-08-05 06:57:12
Tags: #Network Connectivity #Connection Preference
Model: Deco X1500  
Hardware Version: V1
Firmware Version: 1.1.7

I have 3 decos xe75 work great. I have Iot network turned ON. I added deco x1500 and no devices want to connect to it ?
What could be the problem?
I also swap location with other deco xe75. On new location deco Xe75 all devices connected immediately and on X1500 no devices connect.
Only my phone connect on X1500 it can connect on 2,4 and 5 Ghz. I try to set device connection priority to x1500 but no success.
Does anybody know what would be the problem? 
Regards

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Deco X1500 wont connect devices-Solution
2025-08-04 08:59:28 - last edited 2025-08-05 06:57:12

  @Marko_M manually update it web ui.

https://www.tp-link.com/en/support/download/deco-x10/#Firmware

Sayeem Ahmed from Bangladesh
Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:Deco X1500 wont connect devices-Solution
2025-08-04 08:59:28 - last edited 2025-08-05 06:57:12

  @Marko_M manually update it web ui.

https://www.tp-link.com/en/support/download/deco-x10/#Firmware

Sayeem Ahmed from Bangladesh
Recommended Solution
  1  
  1  
#2
Options
Re:Deco X1500 wont connect devices
2025-08-04 09:42:59

  @SayeemAhmed Hello,
I did update already to latest firmware.
Thank you for replay.

  0  
  0  
#3
Options
Re:Deco X1500 wont connect devices
2025-08-05 05:39:14

  @Marko_M 
For all out there who struggles with same problem I figured out. 
My main deco XE75 have IoT network which I setup, then I added deco X1500, which does not support IoT Network
so this network was not emitted by X1500. When you enable IoT on app there is no warning that some of your deco
not have these function. You can only use main network or Guest network with X1500.
Best Regards

  1  
  1  
#4
Options
Re:Deco X1500 wont connect devices
2025-08-05 06:56:48

  @Marko_M Hi, thank you very much for the update.

Deco X10 as well as Deco X1500 added the IOT network on the latest 1.2.0/1.2.1 firmware version, while 1.1.7 hadn't yet.

So if you were still on 1.1.7, it is suggested to manually update to the latest 1.2.1 version via web UI:

How to Update the Firmware of Deco (method 2 via web UI)

 

Wait for your reply.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 263

Replies: 4

Tags

Network Connectivity Connection Preference
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.