ax53 broken webinterface
ax53 broken webinterface
Hello, after updating to 1.5.1 my web interface looks broken
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Update:
Based on other users' experience and sharing, I have published a workaround to resolve this unintended behavior where the web interface menus become invisible after upgrading the router's firmware to the latest version as follows:
Web Interface Menus of Archer AX80/AX53/AX72 Pro Become Invisible After Upgrading Router Firmware
Hello all,
Please clarify whether you enabled the Dark Mode of your browser. Change it to Light Mode for a try, as suggested by zexoni70 and RobPham in the following thread:
https://community.tp-link.com/en/home/forum/topic/836538?replyId=1594802
- Copy Link
- Report Inappropriate Content
I can confirm, that using browser Light theme fix the problem
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have exactly the same problem.......
- Copy Link
- Report Inappropriate Content
Use another web browser or incognito / private tab to exclude any browser cache issues.
You can reset the router to its factory default settings and check if that helps (press the reset button on the back for about 10 seconds).
If that doesn't help try a firmware recovery following the Method 2 from this procedure.
If that doesn't help either contact your local support for further assistance.- here.
- Copy Link
- Report Inappropriate Content
Hello. I also updated today to version 1.5.1, and the web interface no longer displays correctly. Some options appear white on white, while others are invisible. You have to move the mouse intuitively and select options blindly. I downloaded the firmware again and installed it by blindly trying to navigate through the menus, but after reinstalling, the same problem persists. I think this is a very serious issue.- Copy Link
- Report Inappropriate Content
Hi,
Do you remember what version of the firmware was on the router before you upgraded to 1.5.1?
My AX53 V1 updated today from firmware version 1.4.4 to 1.5.1 and the web interface is still fine.
- Copy Link
- Report Inappropriate Content
Version 1.4.4 ( French interface)
impossible to revert to a previous version in addition.....
- Copy Link
- Report Inappropriate Content
From versión 1.4.4 (Spanish web interface)
- Copy Link
- Report Inappropriate Content
Update:
Based on other users' experience and sharing, I have published a workaround to resolve this unintended behavior where the web interface menus become invisible after upgrading the router's firmware to the latest version as follows:
Web Interface Menus of Archer AX80/AX53/AX72 Pro Become Invisible After Upgrading Router Firmware
Hello all,
Please clarify whether you enabled the Dark Mode of your browser. Change it to Light Mode for a try, as suggested by zexoni70 and RobPham in the following thread:
https://community.tp-link.com/en/home/forum/topic/836538?replyId=1594802
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I can confirm, that using browser Light theme fix the problem
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 684
Replies: 14
Voters 0
No one has voted for it yet.