Home Network Community > Wi-Fi Routers > Debug/Verbose Logging option missing from Firmware version 1.1.7
< Wi-Fi Routers

Debug/Verbose Logging option missing from Firmware version 1.1.7

Debug/Verbose Logging option missing from Firmware version 1.1.7

Debug/Verbose Logging option missing from Firmware version 1.1.7
Debug/Verbose Logging option missing from Firmware version 1.1.7
2025-08-20 18:09:02 - last edited 2025-09-14 09:32:28
Tags: #Firmware Update #Feature Request #Web GUI Management #Network Connectivity #Archer BE900 BE24000 verbose log
Model: Archer BE900  
Hardware Version: V2
Firmware Version: 1.1.7

I recently purchased the TP-Link Archer BE900 Hardware version 2.  I updated the firmware to the latest (1.1.7)  I am experiancing so latancy on both wired and wireless at intermittent and seperate times of the day.  I see this referenced in the forums as an option that can be enabled.  Perhaps there is a beta version that support/dev can supply that will allow this option to show up?
 

 

Firmware Version

1.1.7 Build 20250529 rel.12784(5553)

Hardware Version

Archer BE900 v2.0

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Debug/Verbose Logging option missing from Firmware version 1.1.7-Solution
2025-08-21 09:59:21 - last edited 2025-09-14 09:32:28

Hello@RadixLectii ,

Welcome to our community.

 

I think you're referring to a case that's already been escalated to an engineer. Could you provide a link to the relevant information?

Even with debugging capabilities, log information still requires analysis using specialized tools. This is typically done after the case has been escalated to an engineer, who will then be responsible for the analysis.

 

Regarding the latency problem you're having on your device, please restart the entire network system to refresh the network.

 

 

 

 

Welcome to Our TP-Link Community. Check Out the Latest Posts: △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More △New Firmware Update for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Debug/Verbose Logging option missing from Firmware version 1.1.7-Solution
2025-08-21 09:59:21 - last edited 2025-09-14 09:32:28

Hello@RadixLectii ,

Welcome to our community.

 

I think you're referring to a case that's already been escalated to an engineer. Could you provide a link to the relevant information?

Even with debugging capabilities, log information still requires analysis using specialized tools. This is typically done after the case has been escalated to an engineer, who will then be responsible for the analysis.

 

Regarding the latency problem you're having on your device, please restart the entire network system to refresh the network.

 

 

 

 

Welcome to Our TP-Link Community. Check Out the Latest Posts: △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More △New Firmware Update for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Debug/Verbose Logging option missing from Firmware version 1.1.7
Wednesday

Hello @RadixLectii ,

We are delighted to announce the pre-release firmware for the Archer BE900 V2! This update has new advanced features. It is recommended that you try this firmware and take advantage of the new features.

New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More

Any feedback and suggestions are welcome~

Welcome to Our TP-Link Community. Check Out the Latest Posts: △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More △New Firmware Update for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 277

Replies: 2

Tags

Firmware Update Feature Request Web GUI Management Network Connectivity
Archer BE900 BE24000 verbose log
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.