H500 going offline each day
H500 going offline each day
I got an H500 with the latest firmware in July which seemed to work fine for the first two weeks. When we went on vacation all the Tapo devices connected through the H500 went offline after a few days. I was able to reboot them from afar by using smart plugs from a different brand but the H500 still kept going offline.
Since then the H500 goes offline pretty much every day. It has a stable connection with a mesh repeater in the same room. Is it a faulty product?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What's the signal strength (Device Settings page > Network Connection, check the RSSI rate) of your H500 hub? Have you tried putting it to use ethernet connection?
Can you clarify the color of the hub when it goes offline, is it red or amber? Is it blinking slowing or quickly? The following are the led status changes while booting up, FYI.
- Solid red: starting up
- Blinking red and green: Connecting to WiFi
- Solid Green: Connected to the cloud.
Based on the specific connection status of your device, you can refer to the relevant suggestions in this article for troubleshooting. Cannot use the Tapo app to control my smart devices
- Copy Link
- Report Inappropriate Content
Make sure the smart hub's firmware is up-to-date. What's its current version? How to update the firmware of the Tapo devices on the Tapo App
What's the state of the status LED on the hub when it goes offline? How do you restore the connection?
Try switching the hub to use ethernet connection, see if that helps.
- Copy Link
- Report Inappropriate Content
I already switched to a completely different Wifi Mesh brand, so it can't be the connection. I mean, all the other smart devices in the home work fine without ever needing a hard reboot. I even activated "automatic nightly reboot". When it goes offline then the red light blinks.
Firmware is 1.3.1 20250822 rel. 65691
I don't see a newer firmware available.
- Copy Link
- Report Inappropriate Content
What's the signal strength (Device Settings page > Network Connection, check the RSSI rate) of your H500 hub? Have you tried putting it to use ethernet connection?
Can you clarify the color of the hub when it goes offline, is it red or amber? Is it blinking slowing or quickly? The following are the led status changes while booting up, FYI.
- Solid red: starting up
- Blinking red and green: Connecting to WiFi
- Solid Green: Connected to the cloud.
Based on the specific connection status of your device, you can refer to the relevant suggestions in this article for troubleshooting. Cannot use the Tapo app to control my smart devices
- Copy Link
- Report Inappropriate Content
I'm having the same problem. The device randomly goes offline every day and is no longer reachable. The only way to restore the connection is to restart the router.
The H500 is connected to Wi-Fi and I can't use Ethernet. I've tried splitting the network with two separate SSID (2.4GHz and 5GHz) or using a single network, but the problem persists.
When offline the H500 displays a flashing green on status LED.
Firmware version is: 1.3.1 Build 20250822 rel. 65691
thank you in advance
- Copy Link
- Report Inappropriate Content
up!
- Copy Link
- Report Inappropriate Content
marcox wrote
I'm having the same problem. The device randomly goes offline every day and is no longer reachable. The only way to restore the connection is to restart the router.
The H500 is connected to Wi-Fi and I can't use Ethernet. I've tried splitting the network with two separate SSID (2.4GHz and 5GHz) or using a single network, but the problem persists.
When offline the H500 displays a flashing green on status LED.
Firmware version is: 1.3.1 Build 20250822 rel. 65691
thank you in advance
Blinking green slowly means the hub is connected to the WiFi, but not to the cloud. The LED will turn solid green when the hub is linked to the Tapo cloud successfully.
You can try to restart the router. Change the router DNS to 8.8.8.8 and 8.8.4.4, see if that helps.
- Copy Link
- Report Inappropriate Content
Okay, I'll try to update dns on the router and do some tests. But when the status LED blinking green slowly the device appears offline in the app, why?
I'm curious, why does it have to be connected to the cloud? Recordings are local, right?
thank you in advance
- Copy Link
- Report Inappropriate Content
There are some cloud features, such as the remote control ability of the hub and its sub-devices and Tapo automation.
- Copy Link
- Report Inappropriate Content
After more than a month of testing, I'm still struggling with the same problem, it seems clear to me that it's not a DNS issue.
I've resetted, reconfigured, and changed the DNS, all for nothing! After a few days, the device loses its internet connection (it's the only one on my LAN, as all the others are working properly). The "status" LED flashes green, but the hub is no longer accessible. The only way to restore proper operation is to physically force a reboot of the hub itself.
Please find a solution as soon as possible, in this state the hub is unusable
Thanks
- Copy Link
- Report Inappropriate Content
Have you tried to connect the hub to a different WiFi? Like a 5GHz guest network or a hotspot WiFi.
To assist with this case, a specialist will help to follow it up through email. Please check your inbox later to confirm. If the email you used to register for the TP-Link community is not your contact email or you cannot access it, please send me your contact email through private message.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 929
Replies: 15
Voters 0
No one has voted for it yet.