PLC WPA4220 AV600 zumbido

PLC WPA4220 AV600 zumbido

PLC WPA4220 AV600 zumbido
PLC WPA4220 AV600 zumbido
2 weeks ago - last edited Thursday
Model: TL-WPA4220 KIT  
Hardware Version: V4
Firmware Version: Desconocida

Tengo un adaptador PLC TL-WPA4220 AV600, el kit de extensor wifi, y el aparato que emite el wifi, hace un zumbido y se pasa el rato reiniciandose, y por lo tanto no funciona.

No se ha tocado nada desde que se instaló.  Que puede ser?  Entra en garantia?

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:PLC WPA4220 AV600 zumbido -Solution
a week ago - last edited Thursday

Hello@KiKeT ,

According to Google Translate, your question is whether your WPA4220 auto-reboots itself. If there is any discrepancy, please describe it in English.


Here are some steps you can try to troubleshoot the issue:
1. Try a different wall socket: Plug the device into another power outlet to rule out any issues with the current socket.
2. Hard reset the Powerline device and re-pair it:
• For Powerline extenders (like your Wi-Fi unit), press and hold the Reset button for 10 seconds to reset it to factory settings.
• For Powerline adapters, press and hold the Pair button for 15 seconds until all LEDs briefly turn on.

After resetting, you may need to re-pair the devices. Press the Pair button on both units within one minute to reconnect them.

If the issue persists after these steps, please contact local support for further assistance.

Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:PLC WPA4220 AV600 zumbido -Solution
a week ago - last edited Thursday

Hello@KiKeT ,

According to Google Translate, your question is whether your WPA4220 auto-reboots itself. If there is any discrepancy, please describe it in English.


Here are some steps you can try to troubleshoot the issue:
1. Try a different wall socket: Plug the device into another power outlet to rule out any issues with the current socket.
2. Hard reset the Powerline device and re-pair it:
• For Powerline extenders (like your Wi-Fi unit), press and hold the Reset button for 10 seconds to reset it to factory settings.
• For Powerline adapters, press and hold the Pair button for 15 seconds until all LEDs briefly turn on.

After resetting, you may need to re-pair the devices. Press the Pair button on both units within one minute to reconnect them.

If the issue persists after these steps, please contact local support for further assistance.

Recommended Solution
  0  
  0  
#2
Options
Re:PLC WPA4220 AV600 zumbido
Yesterday

  @KiKeT 

  0  
  0  
#3
Options
Re:PLC WPA4220 AV600 zumbido
Yesterday

  @KiKeT 

  0  
  0  
#4
Options
Re:PLC WPA4220 AV600 zumbido
22 hours ago

  @Joseph-TP 

Si, claro que henprobado a cambiar de enchufe y reiniciarlo.. incluso cambiar de casa por si era de mi instalacion electrica.

Leí en otro foro que igual era culpa de un condensador, pero ni idea

  0  
  0  
#5
Options