I bought the TP Archer VR600 V3 AC2100 VDSL modem yesterday and set up the internet. The firmware was the latest, so I didn't update anything. I initially installed it with the default settings. There's no internet slowdown, nor am I losing internet. But hundreds of Errors (pkts) are appearing on Downstream within hours.

While my previous modem (ISP modem: TD-W9970 v3), on the same line, didn't give a single error even after being turned on for days even weeks, why is VR600 V3 giving hundreds of errors under the same conditions? Please, I need your help and guidance.

I reset the modem using Factory settings and adjusted some settings, but I couldn't find a solution.

On same line, on the same DSL Up Time, one has no errors, while the other has 33 Errors (pkts) on Downstream.

I'm also sharing the images; please take a look!

I wonder if this could be related to Current Rate (kbps) on Downstream? Because Archer vr600's is higher.

Upstream's current rates are the same and no error.

Hardware version: Archer VR600 V3
Firmware version: 1.7.0 0.9.1 v009e.0 Build 240929 Rel.31907n

Hardware version: TD-W9970 v3
Firmware version: 21.12.01.01006

The system log section displays some information and notice logs.