Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection

Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection

Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
13 hours ago - last edited 13 hours ago

This Article Applies to

Deco X50(EU/US/JP/CA)/ Deco X55(EU/US/CA)_V1.0/V1.6

 

 

Firmware Medications:

New Features

  • Added Traffic Usage for online clients
  • Added device connection details, including wireless standard/bandwidth/encryption and online time.
  • Added System Runtime and Online Time.
  • Supported Channel Selection.
  • Supported Configuration Backup.

Enhancement

  • Improved 2.4 GHz Mesh Backhaul mechanism.
  • Supported dynamic adjustment of the network traffic load.
  • Reduced latency for App management and improved user interaction experience.
  • Streamlined TP-Link Simple Setup process.
  • Enhanced AI Roaming performance.
  • Reduced system boot-up time.
  • Updated HomeShield service for enhanced protection.
  • Improved network stability and system security.

 

 

Firmware Download Link

Deco X50/X55_V1.0/V1.6 1.8.0_build_2025091213_Pre Release

Update Notice:

 

 Traffic Usage

Device Connection Information

  1      
  1      
#1
Options
8 Reply
Re:Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
10 hours ago

  @David-TP wow what f***link no news for deco x50v1.30/32/33 😡😡😡😡

Sayeem Ahmed from Bangladesh
  3  
  3  
#2
Options
Re:Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
9 hours ago

  @David-TP Please give these features on Deco M4 🥹

Please & Thank You !! ❤️
  1  
  1  
#3
Options
Re:Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
9 hours ago

  @David-TP 

Please consider adding the following features to the Deco X60 (Version 3).

My Deco X60 is having difficulty connecting to the 5 GHz network. I’m located in Bangladesh, where most mobile devices operate on Band 4 (channels 149–165) within the 5 GHz frequency range. It seems that the current firmware on my Deco X60 does not support these higher channels.

Therefore, I kindly request that you develop and release a beta firmware update for the Deco X60 (Version 3, US model) that includes the following improvements:

  1. Manual channel selection for both the 2.4 GHz and 5 GHz bands.

  2. Support for the 5 GHz Band 4 spectrum (channels 149–165) to ensure compatibility with devices commonly used in Bangladesh.

Enabling these features would greatly enhance the functionality and compatibility of the Deco X60, providing better network optimization and seamless connectivity with my devices. I believe this update would also benefit many users in regions with similar 5 GHz band usage patterns.

  4  
  4  
#4
Options
Re:Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
8 hours ago - last edited 6 hours ago

  @David-TP Hi. Great  news!!

Is this beta firmware compatible with x20v4, it's the same hardware platform?

 

After the update

1. After rebooting, the X50 doesn't select the optimal channel/you need to press OPTIMIZE. On 1.7.1, the optimal one was selected immediately.

2. The Intel Ax203 only connects to AC; previously, it was AX.

3. AX Roaming problem. Connect to poor signal DECO X50  , until near x20v4 1.6.6 (everything is fine on 1.7.1)

Update! 

I deleted the adapter in my PC settings a couple of times. Everything worked fine, but after reboot again - AC only

  0  
  0  
#5
Options
Re:Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
5 hours ago

  @xplodzs So u mean 1.8.0 is not good?

Please & Thank You !! ❤️
  0  
  0  
#6
Options
Re:Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
4 hours ago

  @David-TP any news to Deco X50 Outdoor? my Deco X50 Outdoor dont connect to my X60

  0  
  0  
#7
Options
Re:Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
2 hours ago

  @Lincoln Use Connection Preference

Please & Thank You !! ❤️
  0  
  0  
#8
Options
Re:Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection
2 hours ago

  @ARGamingPK1 

Yes, roaming is bad, and you can't go back to 1.7.1.
  0  
  0  
#9
Options