How can I configure Deco X10 ?
How can I configure Deco X10 ?
Hello,
There are many problems occuring right now and I don't know what to do because the router keeps failing to deliver internet to it's clients.
Right now there is only the 2 Deco x10 connected to each other by cable. (cable tested by 2 computers with 2.gbps ethernet port)
I can provide the logs if needed, see below some lines of it:
802.11k / band-steering trouble: repeated “Timeout waiting for 802.11k response” for specific clients (e.g., **:**:**:**:**:**), and occasional “Couldn’t get Tx rate” entries for the same client.
Radio/VAP driver errors: frequent rtk_get_vap_status: cfg80211 return -19 (ENODEV) messages, suggesting the virtual AP interface is intermittently unavailable/resetting
DHCP churn: bursts of DISCOVER/OFFER/ACK cycles for the same address (e.g., 192.168.3.***), implying lease instability and contributing to disconnects/reconnects.
ARP flaps: many “client (…) not found in ARP table” right after association events—looks like L2 instability or radio resets.
Steering oddities: “Beacon report for unknown STA 00:00:00:00:00:00” and band mismatch lines during steering callbacks.
How can I fix these problems?
Can I disable wifi 6 and let only wifi 5?
How can I configure my decos like I can in a archer router?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Can I have the model numbers of the devices that randomly disconnected from the Deco WiFi?
Many devies. Was holding my phone and it went 5G because there was no internet from the nearest deco x10, I came from a zone that had a S7 then passed by a zone with a X10 and then had launch in a zone with X10, it seems like the router just dropped my connection.
logs (this is just some lines, there are MANY lines with the same behavior with many devices):
Thu Nov 6 12:48:14 2025 daemon.err client_mgmt: client(Tapo Smart Video Doorbell Wired) not found in arp table disconnect_counter=0
Thu Nov 6 12:48:14 2025 daemon.err client_mgmt: client(RASPBERRY.....) not found in arp table disconnect_counter=0
Thu Nov 6 12:48:14 2025 daemon.err client_mgmt: client(SOLAR INVERTER) not found in arp table disconnect_counter=0
Thu Nov 6 12:48:14 2025 daemon.err client_mgmt: client(SMART LIGHT) not found in arp table disconnect_counter=0
Thu Nov 6 12:48:33 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=0
Thu Nov 6 12:48:33 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=1
Thu Nov 6 12:48:33 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=1
Thu Nov 6 12:48:33 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=1
Thu Nov 6 12:48:33 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=1
Thu Nov 6 12:48:35 2025 daemon.err uhttpd[21883]: uci: Entry not found
Thu Nov 6 12:48:35 2025 daemon.err uhttpd[21883]: uci: Entry not found
Thu Nov 6 12:48:36 2025 daemon.err uhttpd[21883]: ath02 No such device
Thu Nov 6 12:48:36 2025 daemon.err uhttpd[21883]:
Thu Nov 6 12:48:36 2025 daemon.err uhttpd[21883]: ath12 No such device
Thu Nov 6 12:48:36 2025 daemon.err uhttpd[21883]:
Thu Nov 6 12:48:37 2025 daemon.err udhcpd[9413]: Found static lease: c0a80371
Thu Nov 6 12:48:37 2025 daemon.err udhcpd[9413]: my ntp server ip:17 253 10 149 7ff15768
Thu Nov 6 12:48:37 2025 daemon.err udhcpd[9413]: dhcp offer: add ntp server option
Thu Nov 6 12:48:37 2025 daemon.err udhcpd[9413]: Sending ACK to 192.168.
Thu Nov 6 12:48:37 2025 daemon.err udhcpd[9413]: clear ip xxxxxxxxxxxx
Thu Nov 6 12:48:45 2025 daemon.err nrd[31177]: rtk_get_vap_status: cfg80211 return -19
Thu Nov 6 12:48:51 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=1
Thu Nov 6 12:48:51 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=2
Thu Nov 6 12:48:52 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=0
Thu Nov 6 12:48:52 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=2
Thu Nov 6 12:48:52 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=2
Thu Nov 6 12:48:53 2025 daemon.err client_mgmt: client(...........) not found in arp table disconnect_counter=2
Will these devices restore the internet connection automatically, or do you need to manually restart the Deco to get the internet back?
They restore after some time, varies. If I want it to reconnect right away then I reboot the whole wifi.
By the way, have you seen any Deco turn red/flashing red during the disconnection?
No, haven't looking at it constantly but it's always green when it drops on my phone.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 228
Replies: 11
Voters 1
