Home Network Community > Deco > BE65 - Constant Radar Messages
< Deco

BE65 - Constant Radar Messages

BE65 - Constant Radar Messages

BE65 - Constant Radar Messages
BE65 - Constant Radar Messages
Tuesday
Tags: #Network Connectivity #Access Point Mode #Radar
Model: Deco BE65  
Hardware Version: V2
Firmware Version: 1.2.0 Build 20250718 R43949

Hello all,

 

My Deco BE65 mesh (2 APs) are reporting a radar issue constantly.  My WiFi clients are taking peridioc timeouts (1-10 seconds) which is highly annoying.

 

What is very unusual is this is happening no mater which frequencies I have enabled; even when ONLY 2.4Mhz is enabled (and 5 and 6 are disabled).

 

Of course is also happens with all frequency bands enabled.  Selecting various channel widths on various bands has no impact on behavior or these radar notifications.

 

What am I missing?

 

Thankyou!

 

 

Screencap2

 

Screencap1

 

Screencap3

 

 

 

  0      
 
  0      
 
#1
Options
5 Reply
Re:BE65 - Constant Radar Messages
Tuesday

Message board won't let me edit the post for 24 hours it seems (good thinking on that,another bug report?) so here's the third screenshot I meant to include.

 

screencap3

  1  
  1  
#2
Options
Re:BE65 - Constant Radar Messages
Wednesday

  @Noodler 

Hi, welcome to the community.

Could you please refer to this link to help me submit the Deco App log:

How to submit Deco APP log

Have you tried to manually set the 5Ghz channel to channel 48 and channel width to 80MHz to see whether it still triggers the DFS radar detection?

 

 

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#3
Options
Re:BE65 - Constant Radar Messages
Thursday

  @David-TP Thanks for the suggestion; unfortuantely the 80Mhz width and static definition of channel 48 did not change behaviour.  Given that compeltely disabling the 5Ghz band did not change behaviour I am not too surpirsed, but aprpeciate the thought.

 

Logs uploaded (I think - no confirmation from the app, just a return to the FAQ article after going through the steps to upload the log)

 

Thanks for the help!

 

  1  
  1  
#4
Options
Re:BE65 - Constant Radar Messages
Thursday

  @Noodler 

Hi, thank you very much for the App logs. They've been forwarded to the senior engineer for further analysis.

Please check the email later for more suggestions.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:BE65 - Constant Radar Messages
Yesterday

Radar msg

  @Noodler 

same thing, really annoying this messages popping up every time I open the app.

 

  1  
  1  
#6
Options

Information

Helpful: 0

Views: 105

Replies: 5

Tags

Network Connectivity Access Point Mode
Radar
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.