Solution TL-WPA4220 V5 Auto-Restart When Connected to Starlink Gen3 Routers
This Article Applied to:
TL-WPA4220_V5
Phenomenon:
We have received feedback from users that when the TL-WPA4220 V5 is connected to a Starlink Gen 3 router, the device will automatically and repeatedly restart.
Relevant departments have identified the cause: the interference was likely caused by the Power technology used in the Starlink router's Ethernet port, which led to the instability of the TL-WPA4220.
Meanwhile, our R&D department provided a beta firmware version for the TL-WPA4220. Verified by Mel1767, it was confirmed that this abnormal behavior can be resolved.
Available Solution:
The following beta firmwares are available for manual download to verify whether they resolve this unexpected behavior:
| Model | Direct Download Link |
| TL-WPA4220_V5 | TL-WPA4220_V5_1.0.12 Build 20250910(Beta Firmware) |
Note:
- Please be sure you have read the Beta Test Agreement before upgrading the pre-release firmware!
- For the sake of insurance, it's always recommended to save a copy of the Powerline's Backup Config file before upgrading or downgrading. How to back up and restore the configuration file of TP-Link Powerline Adapter?
- You may follow the guide to upgrade the firmware of your Powerline adapter. How to upgrade firmware of TP-Link Powerline Adapter?
We welcome you to share your experience using the beta firmware and to add details not mentioned above. This includes, but is not limited to:
1. Router's and Powerline adapters' models and firmware.
2. Complete network topology.
3. Specific abnormal behaviors.
Thank you for your feedback and support.