openvpn server not working on Archer NX210

openvpn server not working on Archer NX210

openvpn server not working on Archer NX210
openvpn server not working on Archer NX210
Thursday - last edited Yesterday
Model: Archer NX210  
Hardware Version: V2
Firmware Version: 1.1.0 3.0.0 v60f3.0 Build 250911 Rel.48348n

Model: Archer NX210 v2.0 00000000

Firmware version: 1.1.0 3.0.0 v60f3.0 Build 250911 Rel.48348n

 

Hi, openvpn server is not working on my nx210?

 

Openvpn client is trying to connect to openvpn server and just get wait for reply from server and no connection is made?

 

DDNS and time server ntp is configured fine. DDNS logged in and local time is correct.

 

I also have access control and IP & MAC binding enabled, does this conflict with openvpn server/ openvpn connect clients?

 

Does openvpn server need a SSL Certificate? Any extra config I need to do?

 

 

 

 

  1      
  1      
#1
Options
1 Reply
Re:openvpn server not working on Archer NX210
Yesterday

  @GeniusTechD 

Hi, thank you very much for the feedback.

It is suggested to check the IPV4 address on the Archer NX210 to see whether it is the same as the IP on https://whatismyipaddress.com/.

If they are different, it is very likely that the SIM ISP uses CG-NAT service, and there is one more firewall outside of Archer NX210.

So if you want to connect to the OpenVPN server, you might need to ask for a public APN profile first.

Thanks a lot.

Best regards.

  0  
  0  
#2
Options