Home Network Community > Deco > drop-outs
< Deco

drop-outs

drop-outs

drop-outs
drop-outs
Thursday
Tags: #Network Connectivity #Deco Ethernet Backhaul
Model: Deco PX50  
Hardware Version:
Firmware Version: 1.3.0 build 20250721 rel. 40198

Hi

 

i experience in my mesh net drop-out's. 

Seen as restart of tune-in on Sonos (wireless) and freeze on TV (Apple Tv unit - cabled)

Net consist of old M9's and new Px50's to support for wall penetration. Px50 is master. I'm not quite clear as to hardware versions.

I see from time to time flashing red-light on slave units units. Not seen in master as its not visible.

Will there be a log in the system that i can look into? The drop-out are not new they also existed in the old M9 network

Any suggestions how to proceed?.

 

 

  2      
 
  2      
 
#1
Options
2 Reply
Re:drop-outs
Yesterday

  @nicsol 

Hi, welcome to the community.

I noticed there were two satellite Deco units that use Ethernet Backhaul. Would there be a network switch after the main Deco PX50?

 

There is a "System log" on the web UI: Deco web interface login

You can save the log and open it via Notepad, then search for something like "wan down" to help identify the connection status of the main Deco.

 

By the way, would there be many smart home devices, like Sonos speakers?

Is the Apple TV connected to the main PX50?

 

And how long have you had the Deco? Did the drop-outs start recently?

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:drop-outs
4 hours ago

  @nicsol 

hi David-tp

 

thank you for input. Some answers below.

 

1) i have checked the deco log. No hits on wan and the rest is somehow to complicated for me to read.

2) i have lots of sonos on lan wifi. And other iot devices. Iot channel is not enabled.

3) i do have 3 tp-link 5/8 port std gb switches. I am not sure if i can acces switches to see status.
4) main deco connects directly with stue satelite. Kontor is connected via 2 switches to main deco.

5) Apple tv box is ethernet connected to 1. switch after main deco

 

I have looked into some articles in the community.

 

Would it be advisable to connect the two ethernet connected satelites to same switch just after main deco? I may be able to recable to support this?

 

i am looking forward to your input.

  0  
  0  
#3
Options

Information

Helpful: 2

Views: 35

Replies: 2

Tags

Network Connectivity Deco Ethernet Backhaul
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.