Home Network CommunityDecoTuya 4CH Wifi Relay not connect to Deco BE22
Deco

Tuya 4CH Wifi Relay not connect to Deco BE22

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tuya 4CH Wifi Relay not connect to Deco BE22

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tuya 4CH Wifi Relay not connect to Deco BE22
Tuya 4CH Wifi Relay not connect to Deco BE22
2025-12-12 15:15:53 - last edited 2025-12-15 01:31:21
Tags: #Network Connectivity #Access Point Mode
Model: Deco BE22  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20250718 Rel 54178

Hello, I have the problem.

Till yesterday I had my TUYA relay switchboard connected to the tp-link omada eap225 without Deco. Yesterday I changed the EAP225 and installed deco BE22 three devices with fw 1.1.0 Build 20250718 Rel 54178. From yestarday my tuyas do not work. I have tried with 2,4GHz only with 2,4GHz and 5 GHz nothing.
I have tried with disable "Mesh Technology", then disable "Fast Roaming" and "Beamforming" and not it helped with the current issue.
I have tried WPA/WPA2 security, nope.  
After I create Iot SSID with open security without password, Tuya connected immediately.

I tried reconfigure client in app after connect to unsecured site, to use only 2,4 and no mesh and prefer closest AP. And try new connect to secured SSID and I have not success.
Tuya has CB3S chip and original firmware, version v102 and Main module v1.3.10

 

Thanks Kamil

  1      
1
#1
Options
2 Reply
Re:Tuya 4CH Wifi Relay not connect to Deco BE22
2025-12-15 09:21:39

  @KamilGr 

Hi, thank you very much for the feedback.

I've left a message with a beta firmware version for Deco BE22. Could you please help me test whether it helps with the reported issue?

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for all Deco models
  0  
0
#2
Options
Re:Tuya 4CH Wifi Relay not connect to Deco BE22
2025-12-15 12:04:10

  @KamilGr 

Thanks a lot for the answer, but something is wrong.
I tried to download the zip, bin file using the web interface to upload it as a local firmware upgrade.
The answer is:
Uploading…
Upgrade failed. Please select the latest version of firmware to upgrade.

 

Are you sure you sent me the fw for the right device?
I have a BE22 indoor 3 pack.
I look forward to more information.
Unfortunately I have to say that the behavior of this wifi device is not yet as expected and without problems. I am operating in AP mode, without NAT.

  0  
0
#3
Options

Information

Helpful: 1

Views: 511

Replies: 2

Tags

Network Connectivity Access Point Mode