Lan Ports stop working on TP Link XX530V AX 3000 router when I insert Airtel Patch Cord

Lan Ports stop working on TP Link XX530V AX 3000 router when I insert Airtel Patch Cord

Lan Ports stop working on TP Link XX530V AX 3000 router when I insert Airtel Patch Cord
Lan Ports stop working on TP Link XX530V AX 3000 router when I insert Airtel Patch Cord
Thursday - last edited Thursday
Model: XX530v  
Hardware Version: V1
Firmware Version: 0.7.0 3.0.0 V6096 Build 250606 Rel 25672n

I was enjoying TP-Link XX530V XPON as the main OLT (a Direct Patch Cord from Airtel was inserted into the XX530V Airtel Nokia Router, which was shut down). Inernet over Wi-Fi and LAN was working fine till 3 days back, but all of a sudden Airtel did some changes in their FAT due to which my TP Link XX530V got impacted as when I removed the Airtel Patch Cord from the TP Link router I was able to communicate using LAN cable and the LAN ports were working but without internet and when I inserted the Airtel patch cord again Internet over Wi-Fi started to work whereas all LAN ports stopped working. I am wondering what caused this issue and how to resolve it.

  0      
  0      
#1
Options
1 Reply
Re:Lan Ports stop working on TP Link XX530V AX 3000 router when I insert Airtel Patch Cord
Thursday

  @AlokJain This issue cannot be fixed as this was caused due to some new LAN port allocations, making any TP-Link ONT with LAN ports unusuable over wired.
Only the XX530v v2 and XZ000-G3 with a 22 firmware can work. Unless we have the OLT config (which is next to impossible), this cannot be fixed.
Only option I see is, if somehow TP-Link decides to use 99% of the version 2 features of XX530v into the version 1 and release a firmware. Till then, you are good without the LAN Ports.
@Joseph-TP @Kevin_Z is there any XZ000-G3 v2 2022 firmware? This is extremely important right now for the internet to work, as any 2023 firmware makes the LAN port go offline when PON cable is plugged in.

Knowledge and Wisdom is the key to success
  0  
  0  
#2
Options