Home Network Community > Deco > BE65/X50-Outdoor Compatability
< Deco

BE65/X50-Outdoor Compatability

BE65/X50-Outdoor Compatability

BE65/X50-Outdoor Compatability
BE65/X50-Outdoor Compatability
2 weeks ago
Tags: #Firmware Update #Feature Request #Deco App Related
Model: Deco X50-Outdoor   Deco BE65  
Hardware Version: V2
Firmware Version: 1.2.0 Build 20250718 Rel. 43949

Hi. I recently added a X50-Outdoor to my BE65 network. Initially I was able to access the upper band of the 5ghz network and select a higher frequency. An update was issued for the X50-Outdoor (Firmware Version 1.3.1 Build 20251030 Rel. 41614) which I installed. Since the update to the firmware I have lost any ability to select any upper band frequencies as they have disappeared and can only set lower band frequencies.  I live in Australia and there is no limitation on using the upper band.   Has anyone else experienced this?  Also if any TP-Link employees reads this can they get it fixed. 

  0      
 
  0      
 
#1
Options
6 Reply
Re:BE65/X50-Outdoor Compatability
a week ago

  @paul_gizmo 

Hi, welcome to the community.

Can you share some screenshots here about the wireless settings on the Deco App?

 

"Since the update to the firmware, I have lost any ability to select any upper band frequencies as they have disappeared and can only set lower band frequencies."

-For the upper vs lower band, do you refer to band 4(channel 149-165) vs band 1(36-48)?

 

Did you purchase both Deco X50-Outdoor and Deco BE65 from Australia?

Wait for your reply.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:BE65/X50-Outdoor Compatability
a week ago

  @David-TP 

  0  
  0  
#3
Options
Re:BE65/X50-Outdoor Compatability
a week ago

  @paul_gizmo 

 

Yes. All equipment bought in Australia. I use to see the upper bands in the 5ghz range before I upgraded the firmware on the outdoor device. 

  0  
  0  
#4
Options
Re:BE65/X50-Outdoor Compatability
a week ago

  @paul_gizmo 

  0  
  0  
#5
Options
Re:BE65/X50-Outdoor Compatability
a week ago

  @paul_gizmo 

  0  
  0  
#6
Options
Re:BE65/X50-Outdoor Compatability
a week ago

  @paul_gizmo 

Hi, it is suggested to refer to this reply:

https://community.tp-link.com/en/home/forum/topic/850998?replyId=1646064

Band 4(channel 149-165) doesn't have enough bandwidth for 160MHz. and Deco BE65 as well as Deco X50-outdoor use band1+band 2 to achieve 160mhz over 5Ghz;

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 154

Replies: 6

Tags

Firmware Update Feature Request Deco App Related
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.