Home Network Community > 5G/4G Routers > MR100/MR110 - Outdoor :: Voltage operating range range
< 5G/4G Routers

MR100/MR110 - Outdoor :: Voltage operating range range

MR100/MR110 - Outdoor :: Voltage operating range range

MR100/MR110 - Outdoor :: Voltage operating range range
MR100/MR110 - Outdoor :: Voltage operating range range
2026-01-24 09:01:59 - last edited 2026-02-10 01:20:10
Tags: #Battery #Network Connectivity #4G
Model: TL-MR100-Outdoor  
Hardware Version:
Firmware Version:

Hello,

 

does anybody have any idea what could be an accepted voltage range for MR100 or MR110 Outdoor version of 4G router? Specs show that it has DC jack input that expects 12 V...I'm asking this because I have one 4 cell LiFePo4 battery that can be used for supply, whose voltage range is 12.0 V (almost empty) - 13.6 V (almost full). Should be 13.6 V still fine or could be too high? 

 

I saw that MR100 router (indoor version) comes with 9 V/0.85 A power supply, on the other side it looks like that MR100 - Outdoor has a higher consumption with 12 V / 1 A. What are actual power consumptions of MR100 (indoor) and MR100-Outdoor version?

 

Thx!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:MR100/MR110 - Outdoor :: Voltage operating range range-Solution
2026-01-30 11:12:36 - last edited 2026-02-10 01:20:10

  @D3jcku 

Hi, welcome to the community.

You can refer to the data sheet of MR100-outdoor:https://static.tp-link.com/upload/product-overview/2025/202503/20250327/TL-MR100-Outdoor(EU)1.0_Datasheet.pdf

External Power Supply: 12V/1A DC;48V/0.375A Passive PoE; 44-57V/0.35A 802.3af standard PoE

The fully charged voltage of the battery (13.6V) exceeds the device's maximum allowable input voltage, which may trigger a protective shutdown or potentially damage the device.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for all Deco models
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:MR100/MR110 - Outdoor :: Voltage operating range range-Solution
2026-01-30 11:12:36 - last edited 2026-02-10 01:20:10

  @D3jcku 

Hi, welcome to the community.

You can refer to the data sheet of MR100-outdoor:https://static.tp-link.com/upload/product-overview/2025/202503/20250327/TL-MR100-Outdoor(EU)1.0_Datasheet.pdf

External Power Supply: 12V/1A DC;48V/0.375A Passive PoE; 44-57V/0.35A 802.3af standard PoE

The fully charged voltage of the battery (13.6V) exceeds the device's maximum allowable input voltage, which may trigger a protective shutdown or potentially damage the device.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for all Deco models
Recommended Solution
  0  
  0  
#2
Options
Re:MR100/MR110 - Outdoor :: Voltage operating range range
2026-01-30 18:03:21 - last edited 2026-01-30 18:03:31

  @David-TP 

Thanks for your reply.

 

Do you have any idea what could be an average power consumption of this router? I'm thinking that it could be lower than 10 W, so 12 W power supply is needed just to cover current spikes?
I'm planning to use a solar battery as a source of power, however I'm thinking about using a 10 W power supply (which can deliver also up to 15 W in spikes) which would provide 12 V at the output independently if input would be lower or higher than output voltage. Would a voltage regulator with 10 W of rated power be enough?

 

Many thanks.

  0  
  0  
#3
Options
Re:MR100/MR110 - Outdoor :: Voltage operating range range
2026-02-02 06:00:03

  @D3jcku 

Hi, thanks for the update.

I'm afraid there haven't been further details about its average power consumption. So far, I can only find its recommended power supply standard.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for all Deco models
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 4803

Replies: 3

Tags

Battery Network Connectivity
4G
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.