Early Access Deco BE65/BE63/BE11000_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup
This Article Applies to:
Deco BE65(EU/US/AU/CA/UK)_V2.0
Deco BE63(US)_V2.6
Deco BE11000(US)_V2.6
Hey Everyone!
We are excited to announce a pre-release firmware update introducing DoH & DoT, Speed Limit, and Internet Backup, as well as other advanced features for Deco BE65/63/BE11000. We encourage users to install this firmware and share their feedback with us.
Firmware Modifications
New Features/Enhancements:
- Supported fixing a specific port as the WAN port.
- Added Hybrid Mesh feature.
- Added Internet Backup feature.
- Added DoH & DoT feature.
- Added Speed Limit feature for client devices.
- Optimized HomeShield feature.
- Improved System Stability.
Bug Fixes:
- Fixed the issue where the Online List doesn't show IP addresses of connected clients when Deco is in AP mode.
- Resolved the issue where the Qos Total Bandwidth doesn't take effect as expected under certain circumstances.
- Addressed the issue where the Deco may restart automatically under certain circumstances.
Download Link:
Deco BE65/BE63/BE11000_V2.0/V2.6 |
1.3.0_build_26012212_Beta |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10/1.2.0 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You need to use your BE65 at the main router, as using the BE85 will only allow a network with features specific to the BE85. If you swapped out the 85 to make a 65 the main unit, you'll see the new features. USe the 'swap main Deco within the Deco app for an easy swap out.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Appreciate the reply David. If that is the case from your reply, then the firmware has an issue, my main deco shows in the app; Deco_6056, the second mesh Deco shows; Deco_605C and the third Deco shows; Deco_99E0
Which is all bizarre. The actual broadcast SSID is correct and works, at this stage, as it should.
- Copy Link
- Report Inappropriate Content
Hi, the last four characters would be used as the default SSID, such as Deco_XXXX. Every Deco has its dedicated MAC addresss so the default SSID is also different.
- Copy Link
- Report Inappropriate Content
Hello,
How can we use both DoT and DoH DNS settings on our BE65 v2 devices? I entered DNS for DoT and then DNS values for DoH, but I can only see one of them.
- Copy Link
- Report Inappropriate Content
@mrcoco You can't use both simultaneously.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 2543
Replies: 48
Voters 2
