Early Access Deco BE65/BE63/BE11000_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup
This Article Applies to:
Deco BE65(EU/US/AU/CA/UK)_V2.0
Deco BE63(US)_V2.6
Deco BE11000(US)_V2.6
Hey Everyone!
We are excited to announce a pre-release firmware update introducing DoH & DoT, Speed Limit, and Internet Backup, as well as other advanced features for Deco BE65/63/BE11000. We encourage users to install this firmware and share their feedback with us.
Firmware Modifications
New Features/Enhancements:
- Added WiFi Heatmap. (It also requires the Deco App version to be: 3.10.133 for IOS and 3.10.80 for Android.)
- Supported fixing a specific port as the WAN port.
- Added Hybrid Mesh feature.
- Added Internet Backup feature.
- Added DoH & DoT feature.
- Added Speed Limit feature for client devices.
- Optimized HomeShield feature.
- Improved System Stability.
Bug Fixes:
- Fixed the NAT Loopback issue.
- Fixed the issue where the Online List doesn't show IP addresses of connected clients when Deco is in AP mode.
- Resolved the issue where the Qos Total Bandwidth doesn't take effect as expected under certain circumstances.
- Addressed the issue where the Deco may restart automatically under certain circumstances.
Download Link:
Deco BE65/BE63/BE11000_V2.0/V2.6 |
1.3.0_build_2602261_rel_21001_Beta 2026.3.9 updated |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10/1.2.0 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I installed the beta firmware and I am happy to report that my client list has returned both in the app and in the web browser, see screenshots below.
I will note that the client list in the web browser seems to include offline clients also, which pushes my client list total to 126 instead of the 68 seen in the app. I don't recall the web browser client list showing that way in the past so might be something to look into. I replied to the email thread with TP Link engineer also.
- Copy Link
- Report Inappropriate Content
@rollthedice I do recall the web interface showing all devices, even if not currently connected. I've also had intermittent issues with some devices not showing up.
Wonder @David-TP if it would be possible to offer that updated beta 1.3.1 here for limited additional testing.
Larry
- Copy Link
- Report Inappropriate Content
Looking at that beta file name, does it indicate its only for the V3 version of the BE65?
- Copy Link
- Report Inappropriate Content
@rollthedice @david This version (be65v3_multi-SP4-US-up-ver1-3-1-P1[26040312-rel43141]_2026-04-03_12.03.56.bin) is for BE65 v2 ?
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the message.
The 1.3.1_build_6040312_rel.43141 is for Deco BE65/BE63/BE11000_V2/V2.6, not V3.
I'll check with the senior engineers to see if this version is suitable for open sharing and testing.
Thanks a lot.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 25470
Replies: 167
Voters 4
