Early Access Deco BE65/BE63/BE11000_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Update on May 18, 2026:
The official version for Deco BE65/BE63/BE11000_V2 has been released publicly. Users can check for updates via the Deco's web interface or through the Deco App to install the latest version manually.
How to Update TP-Link Deco Firmware
If you cannot find the latest version, please download the firmware from the link below and upgrade it manually:
1.3.2_build_26040912_rel_40631
We will manually lock this post to better focus on discussions regarding the new firmware. Please feel free to start a new thread here if you need assistance.
Best Regards
-------------------------------------
This Article Applies to:
Deco BE65(EU/US/AU/CA/UK)_V2.0
Deco BE63(US)_V2.6
Deco BE11000(US)_V2.6
Hey Everyone!
We are excited to announce a pre-release firmware update introducing DoH & DoT, Speed Limit, and Internet Backup, as well as other advanced features for Deco BE65/63/BE11000. We encourage users to install this firmware and share their feedback with us.
Firmware Modifications
New Features/Enhancements:
- Added WiFi Heatmap. (It also requires the Deco App version to be: 3.10.133 for IOS and 3.10.80 for Android.)
- Supported fixing a specific port as the WAN port.
- Added Hybrid Mesh feature.
- Added Internet Backup feature.
- Added DoH & DoT feature.
- Added Speed Limit feature for client devices.
- Optimized HomeShield feature.
- Improved System Stability.
Bug Fixes:
- Fixed the NAT Loopback issue.
- Fixed the issue where the Online List doesn't show IP addresses of connected clients when Deco is in AP mode.
- Resolved the issue where the Qos Total Bandwidth doesn't take effect as expected under certain circumstances.
- Addressed the issue where the Deco may restart automatically under certain circumstances.
Download Link:
Deco BE65/BE63/BE11000_V2.0/V2.6 |
1.3.0_build_2602261_rel_21001_Beta 2026.3.9 updated |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10/1.2.0 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
From recent research, Fast Roaming needs MLO to work properly.
I re-enabled Fast Roaming with MLO already enabled, and so far, everything is running OK.
When I last tried Fast Roaming last year, the network became very unstable... i can't remember if I had MLO enabled at the time.
- Copy Link
- Report Inappropriate Content
Hi,
There is a new firmware update in the works for the Deco BE65 Pro. However, we don't have the information on when it will be released. It's recommended to pay attention to the firmware release info in the Deco app or on our official website.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
I have escalated your case to our tech team, and they will contact you via email to assist you further. Please wait patiently.
Best Regards
- Copy Link
- Report Inappropriate Content
Thanks for the confirmation! Glad to know the Pro version hasn't been forgotten. I'll keep an eye out for the update notification in the app. Much appreciated!
- Copy Link
- Report Inappropriate Content
BPCS wrote
From recent research, Fast Roaming needs MLO to work properly.
MLO can compliment Fast Roaming, but Fast Roaming is an early Wi-Fi standard which pre-dates MLO by ~15 years! It has been used in enterprise networking for many years.
MLO allows newer devices to connect to multiple frequency bands simultaneously, it was only added a couple of years ago.
Certainly worth enabling MLO if enough of your devices support it and it doesn't cause problems with any older devices.
- Copy Link
- Report Inappropriate Content
@David-TP My device just received the official v1.3.2 update for BE65. (I'm loving that we can finally see Execution Time, CPU and Memory utilization here). Already configured DoH with Cloudfare and Google DNS and it's working great.
I'm a seeing a new IPv6 type of connection that I have never seen before. This change was not in the patch notes. What is '6º'?
- Copy Link
- Report Inappropriate Content
@Solla-topee thank you. They contacted me via email this morning so I have sent them what they were asking for.
Really impressed so far. 👍🏻
- Copy Link
- Report Inappropriate Content
Hopefully TP-Link will soon bring the same upgrades to the Deco BE85.
- Copy Link
- Report Inappropriate Content
where is the 1.3.2 for the BE65 Pro?
- Copy Link
- Report Inappropriate Content
I have 2 Deco BE65 Pro units, 2 regular Deco BE65 units, and a BE85 as the main router. The BE85 almost never gets updates with Deco — it feels like they’ve forgotten their flagship product.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 43663
Replies: 312
Voters 4
