Early Access Deco BE65/BE63/BE11000_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Update on May 18, 2026:
The official version for Deco BE65/BE63/BE11000_V2 has been released publicly. Users can check for updates via the Deco's web interface or through the Deco App to install the latest version manually.
How to Update TP-Link Deco Firmware
If you cannot find the latest version, please download the firmware from the link below and upgrade it manually:
1.3.2_build_26040912_rel_40631
We will manually lock this post to better focus on discussions regarding the new firmware. Please feel free to start a new thread here if you need assistance.
Best Regards
-------------------------------------
This Article Applies to:
Deco BE65(EU/US/AU/CA/UK)_V2.0
Deco BE63(US)_V2.6
Deco BE11000(US)_V2.6
Hey Everyone!
We are excited to announce a pre-release firmware update introducing DoH & DoT, Speed Limit, and Internet Backup, as well as other advanced features for Deco BE65/63/BE11000. We encourage users to install this firmware and share their feedback with us.
Firmware Modifications
New Features/Enhancements:
- Added WiFi Heatmap. (It also requires the Deco App version to be: 3.10.133 for IOS and 3.10.80 for Android.)
- Supported fixing a specific port as the WAN port.
- Added Hybrid Mesh feature.
- Added Internet Backup feature.
- Added DoH & DoT feature.
- Added Speed Limit feature for client devices.
- Optimized HomeShield feature.
- Improved System Stability.
Bug Fixes:
- Fixed the NAT Loopback issue.
- Fixed the issue where the Online List doesn't show IP addresses of connected clients when Deco is in AP mode.
- Resolved the issue where the Qos Total Bandwidth doesn't take effect as expected under certain circumstances.
- Addressed the issue where the Deco may restart automatically under certain circumstances.
Download Link:
Deco BE65/BE63/BE11000_V2.0/V2.6 |
1.3.0_build_2602261_rel_21001_Beta 2026.3.9 updated |
Update Notice:
- Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
- Please make sure the Deco APP is up-to-date.
- This firmware can’t be degraded directly to the previous 1.2.10/1.2.0 version.
- How to manually update the firmware via web UI.
As always, we value your feedback. If you happen to encounter any concerns during or after the firmware upgrade, please feel free to comment below with the following information. Your input helps us continue to improve and provide the best possible products and support.
- Provide a detailed network layout, including how the devices are connected.
- Include a detailed description of the issue and as much information as possible regarding the specific conditions that seem to trigger the behavior.
Thank you for your continued support and for being part of our community.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
BE65 EU v2
1.3.2 Build 26040912 Rel. 40631
Updated to 1.3.2 today and it's broken my paid for parental controls on both my kids' Android tablets.
Removing their device from their profile allows internet access, but when the device is added to their profile the devices connect to deco and show in the list of connected clients but with no Internet access.
Trial and error with multiple reconnects has identified that it is the "safesearch" and "YouTube restricted" options that is causing this behaviour, if either is turned ON, no Internet is available.
If both are turned "OFF" Internet connectivity is immediately restored.
Not an ideal situation for a paid for option to protect the kids, can you advise please?
- Copy Link
- Report Inappropriate Content
Cheesyslug wrote
BE65 EU v2
1.3.2 Build 26040912 Rel. 40631
Updated to 1.3.2 today and it's broken my paid for parental controls on both my kids' Android tablets.
Removing their device from their profile allows internet access, but when the device is added to their profile the devices connect to deco and show in the list of connected clients but with no Internet access.
Trial and error with multiple reconnects has identified that it is the "safesearch" and "YouTube restricted" options that is causing this behaviour, if either is turned ON, no Internet is available.
If both are turned "OFF" Internet connectivity is immediately restored.
Not an ideal situation for a paid for option to protect the kids, can you advise please?
Hi @Cheesyslug check under parental .. and you will see that urls are blocked.
Same happened to me. Allow all of them and works
- Copy Link
- Report Inappropriate Content
Appreciate the swift reply and help but I'm not sure what you mean here,can you give a bit of further guidance as to where I should be looking?
I have nothing listed on blocked websites.
Filters enabled for mature content, online shopping on one child profile, none on the other.
Both devices only getting Internet access when switching off Safesearch and YouTube Restricted. Otherwise the devices are "connected without Internet"
Thanks again for your assistance!
- Copy Link
- Report Inappropriate Content
MaKTaiL wrote
My device just received the official v1.3.2 update for BE65.
Are you saying that v1.3.2 is now released pubilcally and being pushed to users?
If so I'm surprised this hasn't been announced.
- Copy Link
- Report Inappropriate Content
@David-TP The last official FW for BE65 was Deco BE65(EU)_V2_1.2.0 is dated 08/2025. Soon one year ago.
Probably this was my first and last Deco device. Too many random and weired connectivity issues (devices suddenly can't connect anymore, support not helpful), missing basic features like Eco Mode to switch of WIFI at night, no new (officially released) featuers, endless early access period with buggy FW...
I was used to something different from my previous supplier and their support tea, (Fritz bix in Europe).
- Copy Link
- Report Inappropriate Content
ittroll wrote
MaKTaiL wrote
My device just received the official v1.3.2 update for BE65.
Are you saying that v1.3.2 is now released pubilcally and being pushed to users?
If so I'm surprised this hasn't been announced.
@ittroll yes, I got the notification yesterday when I opened the app. I have the BE65 v2 from Brazil.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You have a similar setup to me. I have contemplated swapping the BE85 for a BE65 as my main, due to the BE65 new firmware features, whilst I wait for the BE85 to get similar updates.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 6
Views: 43684
Replies: 312
Voters 4
