Home Network Community > Deco > X50 middle/connecting deco slow internet speed.
< Deco

X50 middle/connecting deco slow internet speed.

X50 middle/connecting deco slow internet speed.

X50 middle/connecting deco slow internet speed.
X50 middle/connecting deco slow internet speed.
Saturday
Tags: #Access Point Mode #Network Connectivity
Model: Deco X50  
Hardware Version:
Firmware Version:

Hi, 

 

I currently have the X50 setup in access point mode. Connecting the main deco via ethernet cable to my router.

 

The main deco is on the far left side of my house, about 15m away to the right is the middle/ connecting deco and I have one other about 10m away to the right of the middle deco. 

 

What seems to be odd is that the middle/ connecting deco is getting extremely slow internet speed compared to the main as well as the far right deco. Both other decos are getting 100MBPS+ download speeds whilst the middle is getting approx 30-100 KBPS download speed. Wondering if I've gotten a faulty node or if I can fix the issue. 

 

  0      
 
  0      
 
#1
Options
7 Reply
Re:X50 middle/connecting deco slow internet speed.
Sunday

  @JakeyBalakey Click show map and post screenshot

  1  
  1  
#2
Options
Re:X50 middle/connecting deco slow internet speed.
Sunday

  @r0bbienz 

 

Sure. Looks like I was wrong and the far right (A460) is connecting to the main deco. However, I'm wondering why the middle (67E4) is getting much slower speeds when the physical distance and barriers between is a lot greater. 

  0  
  0  
#3
Options
Re:X50 middle/connecting deco slow internet speed.
Sunday - last edited Sunday

Thanks - click on 67E4 and at the top you will see how its connected to the master - something like 2.4 / 5ghz - report back what it says

 

Depends what is around interfering with the signal - they only true way to get full speed is to connect the satellite with the master via ethernet cable

 

Another thing you can try is network optimisation and hop channels and see if that is better

  0  
  0  
#4
Options
Re:X50 middle/connecting deco slow internet speed.
Sunday

  @r0bbienz 

 

Sure ofc! 

 

Here you go. 

 

  0  
  0  
#5
Options
Re:X50 middle/connecting deco slow internet speed.
Sunday
Also, I tend to optimise the network pretty frequently (approx once a week). It might improve speeds for a short time but the speeds are still very noticeably slower. Just wondering what I could do to improve wifi experience I just thought it was odd as both the satellites are on the same side of the house, but 67E4 has considerable less barriers
  0  
  0  
#6
Options
Re:X50 middle/connecting deco slow internet speed.
Sunday
Thanks - looks fine - the only sure fire way is to run a cable to the satellite
  1  
  1  
#7
Options
Re:X50 middle/connecting deco slow internet speed.
Yesterday

  @JakeyBalakey 

Hi, thank you very much for the feedback.

Have you tried to swap the location of the two satellite Deco X50s to see whether the slow speed always followed the same Deco unit?

And a new firmware 1.3.1 was released a few days ago. It is also recommended to test whether the 1.3.1 firmware helps:

Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN

 

Wait for your reply.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 90

Replies: 7

Tags

Access Point Mode Network Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.