BE230 v1.0. Periodic disconnections of 2.4Ghz devices

BE230 v1.0. Periodic disconnections of 2.4Ghz devices

BE230 v1.0. Periodic disconnections of 2.4Ghz devices
BE230 v1.0. Periodic disconnections of 2.4Ghz devices
Saturday
Model: Archer BE230  
Hardware Version:
Firmware Version: 1.2.5 Build 20260108 rel.68570(4555)

On firmware 1.2.5, devices running at 2.4 Ghz are periodically turned off for a minute. I tried resetting, rebooting, and disabling the Smart Connection. I checked the channel - it was free, changed the width, tried other free channels. There is no result. 5GHz works without problems. There were no such problems on the previous firmware.

  1      
  1      
#1
Options
1 Reply
Re:BE230 v1.0. Periodic disconnections of 2.4Ghz devices
Yesterday

Hello @undefined ,

Welcome to our community.

 

Here are some suggestions that may help: 

  • Check Access Control settings: In the web interface (http://tplinkwifi.net) or the Tether app, verify whether devices on the 2.4GHz band are accidentally blocked in the Access Control settings.
  • Check Parental Control profiles: In the web interface or the Tether app, ensure that devices on the 2.4GHz network are not included in any restrictive Parental Control profile.
  • Try connecting a device to the 2.4GHz network and test: Use a phone or laptop to connect specifically to the 2.4GHz band and verify if internet access works.

 

If the suggestions above don't help, please try downgrading the firmware to the previous version. 

 

  0  
  0  
#2
Options