Home Network CommunityDSL Modem Routerskeine Internetverbindung nach Ersteinrichtung
DSL Modem Routers

keine Internetverbindung nach Ersteinrichtung

keine Internetverbindung nach Ersteinrichtung

keine Internetverbindung nach Ersteinrichtung
keine Internetverbindung nach Ersteinrichtung
2026-03-18 07:48:30 - last edited 2 weeks ago
Tags: #Network Connectivity #Installation
Model: Archer VR2100v  
Hardware Version:
Firmware Version:

Hallo Zusammen,

 

gestern wurde mein neuer Vodafone Anschluss freigeschaltet und ich wollte daraufhin alles auf dem Archer VR2100v einrichten. Hat auch zunächst alles problemlos geklappt, habe die Vodafone Daten überall eingegeben und zum Schluss kam aber die Fehlermeldung, dass keine Verbindung zum Internet aufgebaut werden kann. Ich habe den Vorgang ein paar mal wiederholt, auch mit DSL Lite versucht, hat mich immer zum gleichen Ergebnis gebracht. Ab und zu hat es kurz "Online" angezeigt und die Internet LED hat nicht mehr rot geleuchtet aber nach wenigen Sekunden war wieder keine Verbindung da. 

Ich hoffe hier kann mir jemand damit helfen. 

0
0
#1
1 Accepted Solution
Re:keine Internetverbindung nach Ersteinrichtung-Solution
2026-03-20 07:14:15 - last edited 2 weeks ago

Hello @mmarijic ,

Welcome to our community. 

 

According to Google Translate,  it seems that your connection briefly establishes and then drops. If there is any discrepancy, please describe it in English.

Here are some suggestions that may help:
1. Enable SRA (Seamless Rate Adaptation): Access your router's management page via tplinkmodem.net, log in, go to Advanced > Network > DSL Settings, and enable SRA. This helps stabilize the DSL connection.
2. Check your DSL cable connection: Remove any DSL splitters or filters, and connect the router directly to the front wall jacket to reduce interference. This is especially important with new connections.
3. Replace the DSL cable: If possible, try a different DSL cable to rule out cable damage.
4. Configure Google Public DNS: This can improve reliability. Go to Advanced > Network > Internet and change the DNS to 8.8.8.8 and 8.8.4.4. (Guide: How to change DNS servers)
5. Restart your equipment: Power cycle both your router and any front-end device from Vodafone.

 

Best Regards.

Welcome to Community！ Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
0
0
#2
1 Reply
Re:keine Internetverbindung nach Ersteinrichtung-Solution
2026-03-20 07:14:15 - last edited 2 weeks ago

Hello @mmarijic ,

Welcome to our community. 

 

According to Google Translate,  it seems that your connection briefly establishes and then drops. If there is any discrepancy, please describe it in English.

Here are some suggestions that may help:
1. Enable SRA (Seamless Rate Adaptation): Access your router's management page via tplinkmodem.net, log in, go to Advanced > Network > DSL Settings, and enable SRA. This helps stabilize the DSL connection.
2. Check your DSL cable connection: Remove any DSL splitters or filters, and connect the router directly to the front wall jacket to reduce interference. This is especially important with new connections.
3. Replace the DSL cable: If possible, try a different DSL cable to rule out cable damage.
4. Configure Google Public DNS: This can improve reliability. Go to Advanced > Network > Internet and change the DNS to 8.8.8.8 and 8.8.4.4. (Guide: How to change DNS servers)
5. Restart your equipment: Power cycle both your router and any front-end device from Vodafone.

 

Best Regards.

Welcome to Community！ Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
0
0
#2

Information

Helpful: 0

Views: 113

Replies: 1

Tags

Network Connectivity Installation
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.