Home Network CommunityDecoDeco X10 - Firmware update failed on Main
Deco

Deco X10 - Firmware update failed on Main

Deco X10 - Firmware update failed on Main

Deco X10 - Firmware update failed on Main
Deco X10 - Firmware update failed on Main
2026-04-19 16:10:48 - last edited 2026-05-04 09:41:23
Tags: #Firmware Update #Deco App Related
Model: Deco X10  
Hardware Version: V1
Firmware Version: 1.4.0 Build 20251222 Rel. 45343

Hello,

I have 5 deco's setup. 1 Main and 4 are satellite. When I login to the Main deco IP address and check the firmware page. I see Main deco still on 1.3.0 Build 20250725 Rel. 54254 firmware version and satellite are on 1.4.0 Build 20251222 Rel. 45343. Refer the screenshot below.

 

Why this difference, even the firmware update is set to Auto update. Anyone help me to understand?

  0      
0
#1
Options
1 Accepted Solution
Re:Deco X10 - Firmware update failed on Main-Solution
2026-04-21 12:25:04 - last edited 2026-05-04 09:41:23

  @Darshan_S 

Hi, 
Glad to hear that your main Deco has updated firmware successfully.

 

You can test with your Deco units for some time, and if the main Deco unit has the same phenomenon, please refer to the following instructions to troubleshoot:
Fix unstable connection when connected to the Deco network
 

Best Regards

>> Check What's Currently Going on With Deco >> Deco Wi-Fi Heatmap ready for all Deco models
Recommended Solution
  0  
0
#4
Options
3 Reply
Re:Deco X10 - Firmware update failed on Main
2026-04-19 19:22:07

  @Darshan_S 

 

See if the steps in this post helps 

 

https://community.tp-link.com/en/home/forum/topic/656154

 

If not please get back to us thanks. 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
0
#2
Options
Re:Deco X10 - Firmware update failed on Main
2026-04-20 07:06:12

  @HelpFixDecoApp , Thanks. 

Manual update worked. Not sure why the main deco was not updated automatically. 

Also, Main deco sometimes become inactive/devices will disconnect, not sure this is right place ask this question. To find out the issue on logs I found the mismatch of the firmware.

  0  
0
#3
Options
Re:Deco X10 - Firmware update failed on Main-Solution
2026-04-21 12:25:04 - last edited 2026-05-04 09:41:23

  @Darshan_S 

Hi, 
Glad to hear that your main Deco has updated firmware successfully.

 

You can test with your Deco units for some time, and if the main Deco unit has the same phenomenon, please refer to the following instructions to troubleshoot:
Fix unstable connection when connected to the Deco network
 

Best Regards

>> Check What's Currently Going on With Deco >> Deco Wi-Fi Heatmap ready for all Deco models
Recommended Solution
  0  
0
#4
Options

Information

Helpful: 0

Views: 378

Replies: 3

Tags

Firmware Update Deco App Related