Security
Security
The Deco security is set to WPA2/WPA3 but my Macbook Pro (2015, Monterey) advises "WPA weak security" on the wireless settings. Why is this ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
@ARGamingPK1 Thank you for your suggestions.
@Lindr_ZA The following instructions may also help you: The Weak Security and Privacy Warning on the iOS devices
Best regards.
- Copy Link
- Report Inappropriate Content
@Lindr_ZA Deco E4 does'nt support WPA3. I think you are using WPA/WPA2 and you have to use only WPA2
- Copy Link
- Report Inappropriate Content
Hi,
@ARGamingPK1 Thank you for your suggestions.
@Lindr_ZA The following instructions may also help you: The Weak Security and Privacy Warning on the iOS devices
Best regards.
- Copy Link
- Report Inappropriate Content
@Lindr_ZA Set it to WPA2-PSK (AES)
- Copy Link
- Report Inappropriate Content
Hi,
If the Deco's wireless security type is set to WPA2-PSK (AES) but your MacBook reports "WPA weak security", please remove/forget the Deco's Wi-Fi network on your MacBook, then reconnect, and check whether the same message appears.
If so, please send us the screenshot of the page showing the message "WPA weak security", tap the "i" icon next to the message, and send us the screenshot of the page showing why the message appears.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee thanks for your reply. I checked that the DECO is set to WPA2-PSK (AES). I removed my wireless network and reconnected. I am still getting the same messages:
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Lindr_ZA You can try new firmware update.
1.3.1 Build 20260403
- Copy Link
- Report Inappropriate Content
@Lindr_ZA The first one should work as intended
- Copy Link
- Report Inappropriate Content
@Solla-topee I'm not the one with the issue
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 341
Replies: 11
Voters 0
No one has voted for it yet.