@LucaRava 

Yes, as long as the firmware supports it the following directions should help you set it up.

Here are the steps to configure Wi-Fi Schedule:

1. Open the Deco app and go to MORE > Eco Mode
2. Turn on Eco Mode
3. Enter Wi-Fi Schedule
4. Set the time period during which you want Wi-Fi to be disabled

Important things to note:

• When Wi-Fi Schedule is active, all networks will be disabled (main network, guest network, IoT network, and Deco backhaul network). You won't be able to access your Deco network until the scheduled period ends.

• If you want to maintain some connectivity during the scheduled period, you can enable the "Keep 2.4GHz Wi-Fi On" option. This will keep the 2.4GHz network active, allowing you to still access your Deco network while the 5GHz and 6GHz bands are turned off.

This feature is perfect for reducing power consumption during hours when you don't need internet access, such as overnight or during work hours.

  @LucaRava 

Hi,
Here are the instructions for configuring ECO mode in the Deco app.
What's the ECO mode, and how do you configure it on Deco?
 

Please ensure your Deco's firmware and Deco app are up to date, and then you can go to the Deco app > More page to see if ECO mode is available.

Best Regards

  @Solla-topee For whatever reason, this useful feature (Eco Mode) isn't available for BE65. Hope this will be provided soon.

  @Zonk76 

There is a new beta out for your Deco BE65 hw V2 unit if you want to try it. While it doesn't add ECO mode it does add a lot of other new features. You can read about it from the link below.

This Article Applies to:

Deco BE65(EU/US/AU/CA/UK)_V2.0
Deco BE63(US)_V2.6
Deco BE11000(US)_V2.6

Deco BE65/BE63/BE11000_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup