I'm unable to import valid wireguard .conf to the client (tested on pc), after manually adding the info and enabling the client i lose access to the routers webUI (it still responds to ping) nothing routes through the actual vpn though. I tested an .ovpn before that and it wouldnt even import the file
Hi,
In your case, please check if the following article helps.
Archer MR600 & TL-MR6400 Fails to Connect to OpenVPN or WireGuard VPN as Client
Best Regards
Hi! I tried the beta FW and am able to upload both wg and ovpn files now, the wg never connects though and the ovpn while connected does not actually route anything through the vpn
Hi,
The information in your previous reply is unclear. Please confirm whether the information below about your case is correct. If not, please describe the phenomenon you are experiencing in detail.
--After your Archer MR600 V3.0 upgrade to the firmware v1.3.0 0.9.1 Build 260522 Rel.39772 in this thread, you can upload the .ovpn file to the router when configuring the WireGuard and OpenVPN client. However, the WireGuard VPN never connects; the OpenVPN connection is established, but the VPN does not work.
If so, please provide the following information for further analysis.
1. Please send us a screenshot of the router's web UI > Advanced > Status page.
2. Please send us a screenshot of the router's web UI > Advanced > System Tools > Firmware Upgrade page.
3. When you try to connect the VPN server directly on your PC rather than on the router, can you connect successfully with the same .ovpn file?
Best Regards
Solla-topee wrote
Hi,
The information in your previous reply is unclear. Please confirm whether the information below about your case is correct. If not, please describe the phenomenon you are experiencing in detail.
--After your Archer MR600 V3.0 upgrade to the firmware v1.3.0 0.9.1 Build 260522 Rel.39772 in this thread, you can upload the .ovpn file to the router when configuring the WireGuard and OpenVPN client. However, the WireGuard VPN never connects; the OpenVPN connection is established, but the VPN does not work.
If so, please provide the following information for further analysis.
1. Please send us a screenshot of the router's web UI > Advanced > Status page.
2. Please send us a screenshot of the router's web UI > Advanced > System Tools > Firmware Upgrade page.
3. When you try to connect the VPN server directly on your PC rather than on the router, can you connect successfully with the same .ovpn file?
Best Regards
Yes exactly, the .ovpn works on my computer and correctly routes the traffic through the VPN, when I upload it to the router how ever, it says it is connected but no traffic is routed through it and my public IP stays the same when checking
Hi,
I have escalated your case to our tech team, and they will contact you via email to assist you further. Please wait patiently.
Best Regards
Solla-topee wrote
Hi,
I have escalated your case to our tech team, and they will contact you via email to assist you further. Please wait patiently.Best Regards
I'm embarrassed to admit that I added the wrong device while trying!
Both .ovpn and .conf works now with the beta fw, thank you for your help!
Helpful: 0
Views: 121
Replies: 6
No one has voted for it yet.
We use cookies and browser activity to improve your experience, personalize content and ads, and analyze how our sites are used. For more details, please read our Privacy Policy.
