Configuration Guide How to set up Ethernet Backhaul with your Deco devices
Ethernet Backhaul is a feature that makes it possible to wire the Deco units together to optimize the bandwidth and network stability.
Normally, after wired Deco units with an Ethernet cable, the Ethernet backhaul will take effect automatically.
Typical connection structures for Ethernet Backhaul
QA
Q1: Which switch models support Ethernet backhaul?
Most of the switches on the market support Deco's Ethernet backhaul feature. If you don’t have a switch or if your switch is verified not compatible with Deco Ethernet Backhaul, the following models will be a good choice:https://www.tp-link.com/home-networking/all-soho-switch/
Q2: To use the Ethernet Backhaul feature, do I need to wire all my Deco units?
Nope. The following network layout works as well.
Q3: How do I know if Ethernet Backhaul takes effect?
Q4: Why my satellite Deco's signal source shows "Wi-Fi" instead of "Ethernet" in the Deco app even if the main Deco and the satellite Deco are connected to the same switch?
Please refer to the suggestions on this link:Ethernet Backhaul not working
Q5: Why my Deco units become unstable once they're connected via a switch?
The Deco Ethernet backhaul feature is based on the standard IEEE 1905.1 protocol. However, we find that some switches, mainly the D-Link switches, will not forward packets based on IEEE 1905.1 protocol, causing all Deco units in a network loop and becoming quite unstable, you might consider changing another switch or contacting switch’s support directly. TP-Link Switches are mostly compatible with our Deco’s Ethernet backhaul.
Q6: Can I set up different Deco models such as M5 and M9 Plus together through Ethernet backhaul?
Yes, just configure and add different Deco models in the same Deco network. After that, you can wire them to set up the Ethernet backhaul connection.
You could refer to the link to learn how to add different Deco models in the same network.
Q7: Can I use one Ethernet port on the Deco for Ethernet backhaul and the other to connect a computer?
Yes. For more details, please refer to How to use Ethernet Ports on Deco?
Q8: Can I use a pair of powerline adapters to build Ethernet Backhaul, like Main Deco---master Powerline adapter~~~extended Powerline adapter---satellite Deco?
Yes and please keep in mind that the Ethernet Backhaul speed now will depend on both the Ethernet cable quality and Powerline rate.
Related Article: General questions about Ethernet Backhaul feature on your Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Is there a recommended way to setup ehternet backhaul? I currently have the middle option going but should i go for the last option instead?
- Copy Link
- Report Inappropriate Content
@TP-Link Deco or anyone have recommendations for a 2.5Gb switch that works for Wired Backhaul in this configuration?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi - I have a Deco X20 and am wondering if I can connect an ethernet cable to a computer from a Deco that is NOT the Main Deco. It seems from Q2, and the corresponding diagram, that this MIGHT work. However, when I connect the ethernet cable from a non-Main Deco to my computer it is not recognizing that connection.
Any assistance would be greatly appreciated.
Thank you !
- Copy Link
- Report Inappropriate Content
@laforfreedoms Pergilah tolol
- Copy Link
- Report Inappropriate Content
@mob25 Yes it is of course supported. What does "not recognising" mean? Computer doesn't show network connection? What if you plug in to another Deco? Another Ethernet device into that Deco? I assume that Deco is working in other respects.
This may be a question for another forum...
- Copy Link
- Report Inappropriate Content
@McFly Thanks for the response and confirming that it should work (without some type of setup of the Deco device thru the app, etc...).
Yes, it means that it does not show up as an active option on my computer network interface after it has been plugged in.
I'll do a bit more researching to see if I can find an answer.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 19
Views: 548589
Replies: 409
Voters 14
