Home Network Community > All Threads > Archer C6 - missing "Allow guests to access my local network"
< All Threads

Archer C6 - missing "Allow guests to access my local network"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C6 - missing "Allow guests to access my local network"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C6 - missing "Allow guests to access my local network"
Archer C6 - missing "Allow guests to access my local network"
2019-04-10 19:04:41 - last edited 2023-02-16 11:30:39
Tags: #Feature Request #Access Point Mode
Model: Archer C6  
Hardware Version: V2
Firmware Version: 1.1.0 Build 20190115 rel.71848(4555)

Hi,

 

i cannot find option "Allow guests to access my local network" in my Archer C6 administration

 

thank you for your help

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer C6 - missing "Allow guests to access my local network"-Solution
2021-11-18 09:51:28 - last edited 2022-06-28 03:08:44

@il_Gandi 


Imagine when the router is working in AP mode, and it is allowed to configure isolation between the main and the guest, the devices connected to the guest will not be able to access the internet, as it cannot communicate with the gateway in this configuration.


When working in AP mode, the main reason to have the main network and the guest network is to distinguish the two, as some customers prefer not to share the wireless credentials with guests.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:Archer C6 - missing "Allow guests to access my local network"
2019-04-11 03:23:19

Hi,

 

What is the operation mode of Archer C6? Is it access point mode or wireless router mode? 

 

Please confirm whether you can see this option under wireless router mode. 

 

Good day. 

 

elephant wrote

Hi,

 

i cannot find option "Allow guests to access my local network" in my Archer C6 administration

 

thank you for your help

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer C6 - missing "Allow guests to access my local network"
2019-04-11 03:44:11

 

access point mode cannot config that, it is enabled by default

 

since...

 

assume a layer 2 topology, wan side = lan side = normal wireless

 

if the guest wireless want to access wan side, means access internet, then it shall, guest wireless = wan side

 

thus guest wireless = lan side, otherwise it cannot access internet

 

hope it is clear to you

  0  
  0  
#3
Options
Re:Archer C6 - missing "Allow guests to access my local network"
2021-11-17 13:07:45 - last edited 2021-11-17 13:09:31

News about that? I'm in the same condition...

Archer C6 v2.0   -   Access Point Mode   -   1.3.6 Build 20200902 rel.65591(4555)

Actually the guest network (still without a schedule...) is totally useless if you can see the local network

 

 

 

  0  
  0  
#4
Options
Re:Archer C6 - missing "Allow guests to access my local network"-Solution
2021-11-18 09:51:28 - last edited 2022-06-28 03:08:44

@il_Gandi 


Imagine when the router is working in AP mode, and it is allowed to configure isolation between the main and the guest, the devices connected to the guest will not be able to access the internet, as it cannot communicate with the gateway in this configuration.


When working in AP mode, the main reason to have the main network and the guest network is to distinguish the two, as some customers prefer not to share the wireless credentials with guests.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 2767

Replies: 4

Tags

Feature Request Access Point Mode
Related Articles
Archer C6 "allow guests to access each other" setting has no effect
397 0
Archer C6 v2 not working in access point mode
1793 0
Guest Wlan: Can't find the option - Allow guests to access your local network
634 0
Disable "allow guests to access my local network" has no effect for guest
3936 1
Gaining access to Beta firmware (Archer C6)
3830 0
Archer C6 as a repeater for Archer C6
79439 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.