cant open ports on my router - TD-W9960
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi I confirm, I have the same problem.
info:
Hardware Version:TD-W9960 v1 00000000
Firmware Version:1.2.0 0.8.0 v009d.0 Build 201016 Rel.78709n
TP-link's DDNS works correctly and dns queries are responded correctly(With my own public ip).
My ISP gives me public dynamic ip (Even my very old tp-link router works fine and route traffic correctly)
I seems even http remote management of this router works just fine.
but any configuration in virtual server menu does not work!
I don't know where the problem is.
by the way I have assigned my pc IP: 192.168.44.20(obviously in range of my own local network 192.168.44.0/24) and I have bineded a tcp connection to 0.0.0.0:2020. any firewall is turned off
Access from LAN with 192.168.44.20:2020 is ok. but even from LAN network wan_ip:2020 or ddns_domain:200 is not accessible
every this works just fine with my old router but not with 9960!
screenshot:
status:
Virtual server:
What should I do?
Thanks
Hi, sorry for the delay.
Since we were not able to reproduce the same issue, could you please help me run the following test:
1. Download the http server from below: https://www.rejetto.com/hfs/
2. Run this file server on your windows PC then change the port to which one that you want to open or test;
3. Allow this server through your windows firewall: https://bing.com/search?q=allow+app+through+windows+firewall
With the three steps above, we will have a LAN server ready for the test.
4. Add a Virtual Server Rule on the modem such as port 111 for 172.31.49.174
5. Try to access the server via WAN:111
If you were able to access the local HFS server, the port forwarding should be fine.