Deco M3W AC1200 - No Connected Clients Showing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M3W AC1200 - No Connected Clients Showing

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M3W AC1200 - No Connected Clients Showing
Deco M3W AC1200 - No Connected Clients Showing
2020-01-28 14:30:30 - last edited 2020-07-03 06:59:38
Model: Deco M4  
Hardware Version:
Firmware Version:

Hello

 

I have setup a Mesh network using 3 X Deco M4 units which has totally transformed our internet! They are amazing!

 

There was one area of the house which was still a bit low on WIFI wo i have purchased and installed a Deco M3W - This seems to have fixed the problem but i cant confirm how its working as it shows up differently in the App

 

The Deco M4 units show up with what clients are connected to each one, which gives me great confidance the system is working as it should.

 

The  M3W simply says "Deco is wokring well" with no options to see any connected clients - am i doing something wrong?

 

Thanks very much in advance

 

Mark

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco M3W AC1200 - No Connected Clients Showing -Solution
2020-07-03 06:59:34 - last edited 2020-07-03 06:59:38

@vonklars 

 

Hello, sorry that there is currently no exact date or time expectation for the M3W new firmware release, it is suggested to keep an eye on the Deco app or the official website to get more updates. 
 

Deco firmware updates are released on a rolling basis, and new features will be added via the firmware upgrade. However, before releasing new firmware officially, we need to do round and round tests to verify the performance of the whole mesh system as well as the stability, so it will take some time and we hope our customers be more patient with this.

 

Good day. 

Recommended Solution
  0  
  0  
#8
Options
22 Reply
Re:Deco M3W AC1200 - No Connected Clients Showing
2020-02-02 06:44:15

@MarkN 

 

Hello Mark, it is normal, you do not have to worry about it cause the Deco M3W does not support this feature yet; that is why you cannot review the detailed information on the Deco page;

 

And you can verify that it will indicate that the feature is unavailable when you hit a client which connects to the Deco M3W.

 

So in one word, it is caused by the lack of correspondingly feature. And it will be added via firmware upgrade in the future.

 

May it help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Deco M3W AC1200 - No Connected Clients Showing
2020-02-27 17:37:07

@Kevin_Z 

 

Hi! I have a Deco M3W, for few months now... when is expected new firmware?

The lack of advanced info like the connected devices to it, is cause-me a lot of issues... we can't also disable the "mesh" feature to avoid some fixed devices to be jumping between other deco's. 

If we have 3 M4's we have this available, but after add the M3W, some of the features simply disappear!! 

 

Thanks, João

  0  
  0  
#4
Options
Re:Deco M3W AC1200 - No Connected Clients Showing
2020-03-26 06:57:02

Any news on this? I think the M3W feels useless without knowing what's connected. 

 

I tested unplugged all satalites apart from one main M4 and one M3W - the M4 doesn't even say it connects to the M3W

  3  
  3  
#5
Options
Re:Deco M3W AC1200 - No Connected Clients Showing
2020-04-11 19:41:06

@MarkN 

I'd also be higly interessted in a firmware upgrade - it is outrageous that features like beamforming for the whole network are disabled because of one device.

 

@Kevin_Z , any news on m2w updates?

  1  
  1  
#6
Options
Re:Deco M3W AC1200 - No Connected Clients Showing
2020-07-02 14:42:23
Hi @Kevin_Z, any insights when this will be added to the firmware? Regards, Lars
  0  
  0  
#7
Options
Re:Deco M3W AC1200 - No Connected Clients Showing -Solution
2020-07-03 06:59:34 - last edited 2020-07-03 06:59:38

@vonklars 

 

Hello, sorry that there is currently no exact date or time expectation for the M3W new firmware release, it is suggested to keep an eye on the Deco app or the official website to get more updates. 
 

Deco firmware updates are released on a rolling basis, and new features will be added via the firmware upgrade. However, before releasing new firmware officially, we need to do round and round tests to verify the performance of the whole mesh system as well as the stability, so it will take some time and we hope our customers be more patient with this.

 

Good day. 

Recommended Solution
  0  
  0  
#8
Options
Re:Deco M3W AC1200 - No Connected Clients Showing
2020-10-09 08:37:26

Hi

 

Can you please confirm if we're any closer to this firmware update?

I too have fallen into the trap of buying one of the M3Ws to resolve a coverage gap, and in the understanding that this would be compatible with my existing kit (M5s), only to find it's compatible alright, but removes key pieces of functionality from my mesh.

 

I do really think you either need to be much clearer about this, or to get that firmware update out as quickly as you can. I note that people have been raising this since Dec 19 from what I can find. I know this has been an odd year but I don't think an issue as big as this should take you nearly a year to sort.

 

Chris

  0  
  0  
#9
Options
Re:Deco M3W AC1200 - No Connected Clients Showing
2020-10-29 04:55:39

@MarkN Were you able to try out the latest beta release - https://community.tp-link.com/en/home/forum/topic/227662

Does it solve your issue?

  0  
  0  
#10
Options
Re:Deco M3W AC1200 - No Connected Clients Showing
2020-10-29 06:10:38

@Avijit 

 

no this hasn't fixed the problem 

  0  
  0  
#11
Options
Re:Deco M3W AC1200 - No Connected Clients Showing
2021-06-14 03:13:59

@TP-Link_Deco 

Any update on this? 

I'm really need this feature to monitor my devices

  1  
  1  
#12
Options

Information

Helpful: 0

Views: 10132

Replies: 22

Related Articles