X60 problem after firmware upgrade to 1.5.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

X60 problem after firmware upgrade to 1.5.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
X60 problem after firmware upgrade to 1.5.0
X60 problem after firmware upgrade to 1.5.0
2021-03-24 21:07:44 - last edited 2021-04-22 06:15:32
Model: Deco X60  
Hardware Version: V1
Firmware Version: 1.5.0 Build 20210121 Rel. 54042

Hello!

I was "stupid" enough to upgrade the Deco firmware from 1.2.4 to 1.5.0 Build 20210121 Rel. 54042. After the upgrade my Internet connection drops at least twice a day :-( Has anyone else experienced this?

  1      
  1      
#1
Options
1 Accepted Solution
Re:X60 problem after firmware upgrade to 1.5.0-Solution
2021-04-22 06:15:17 - last edited 2021-04-22 06:15:32

@arnoutdeville 

Hi, since the firmware 1.5.0/1.5.1 has added many features, it could not be reverted back to the previous firmware 1.0.5/1.2.6;

And we have tested on our side, the stability and speed did not get affected after the firmware upgrade;

So if you have any issue after the firmware upgrade, please leave me a private message or send an email to support@tp-link.com with Forum ID 258678

At the same time, please add the following information:

  1. The TP-Link ID;
  2. The system log from the web UI;
  3. A picture of your network diagram;
  4. The detailed issue after firmware upgrade; if it is about the speed, please feel free to add some pictures to the email;

 

Thank you very much

Recommended Solution
  0  
  0  
#6
Options
7 Reply
Re:X60 problem after firmware upgrade to 1.5.0
2021-03-26 06:26:28

@steinab 

Hi, thank you very much for your kind feedback;

Would any Deco blink red when the connection dropped out?

Have you checked whether all the Deco had the same issue or just the satellite Deco?

Did both wireless and Ethernet connection drop out?

How did you restore the connection every time?

Thank you.

  0  
  0  
#2
Options
Re:X60 problem after firmware upgrade to 1.5.0
2021-03-29 12:02:07
Do I dare upgrade? How many have this issue? I do not want to experience the problem like the wan last summer.
  0  
  0  
#3
Options
Re:X60 problem after firmware upgrade to 1.5.0
2021-04-09 06:42:40

@steinab 

my x20 also same problem since i update firmware V1.2_201013 since 5/10/2020 , the solution is downgrade firmware . untill now tp link also no take any action to settle this problem , too bad

  0  
  0  
#4
Options
Re:X60 problem after firmware upgrade to 1.5.0
2021-04-21 09:59:50

@steinab I'm having the same issue with my Deco X60.

I already tried the firmware recovery (https://www.tp-link.com/nl-be/support/faq/2958/), but I'm unable to put them in recovery mode.

 

Any ideas?

  0  
  0  
#5
Options
Re:X60 problem after firmware upgrade to 1.5.0-Solution
2021-04-22 06:15:17 - last edited 2021-04-22 06:15:32

@arnoutdeville 

Hi, since the firmware 1.5.0/1.5.1 has added many features, it could not be reverted back to the previous firmware 1.0.5/1.2.6;

And we have tested on our side, the stability and speed did not get affected after the firmware upgrade;

So if you have any issue after the firmware upgrade, please leave me a private message or send an email to support@tp-link.com with Forum ID 258678

At the same time, please add the following information:

  1. The TP-Link ID;
  2. The system log from the web UI;
  3. A picture of your network diagram;
  4. The detailed issue after firmware upgrade; if it is about the speed, please feel free to add some pictures to the email;

 

Thank you very much

Recommended Solution
  0  
  0  
#6
Options
Re:X60 problem after firmware upgrade to 1.5.0
2021-06-28 18:59:29

@TP-Link 

 

Have you just closed this problem that users have or is there a new firmware on it way? 

  0  
  0  
#7
Options
Re:X60 problem after firmware upgrade to 1.5.0
2021-06-29 01:43:10

@Sematwir 

 

Have you ever encountered an issue with the current firmware? As we have stated previously that the official firmware had been fully tested and confirmed to be stable, please provide some basic information if you do encounter an issue, then we can help.

  0  
  0  
#8
Options

Information

Helpful: 1

Views: 1882

Replies: 7

Related Articles