Deco X60 firmware upgrade to 1.0.17

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco X60 firmware upgrade to 1.0.17

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco X60 firmware upgrade to 1.0.17
Deco X60 firmware upgrade to 1.0.17
2023-05-26 12:19:58 - last edited 2023-05-28 05:14:55
Model: Deco X60  
Hardware Version: V3
Firmware Version: 1.0.15 Build 20221111 Rel. 77798

Hi.

I have a Deco X60 v3.2 Whole Home Mesh Wi-Fi 6 System AX5400 (2 pack).

 

My firmware is 1.0.15.

 

I check if there is any upgrade via the app and the web ui, but it says that it is up to date.

I visited the website of tpLink and I see that there is a 1.0.17 version available.

 

I have the following questions:

1. Why the app/web ui says there is no update available.

2. Should I update to 1.0.17 ? (I can do that via the web ui via wifi).

3. My Deco X60 is v3.2. From the dropdown list of available versions in the webpage of Tplink I see that the options I can choose from are v3 and v3.6. There is no v3.2. Which version is mine?

4. As I said, I have a two (2) pack. When I will update the firmware via the web ui, will both packs update to the new firmware automatically or is there something I must do to update them one by one?

 

Many thanks!

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco X60 firmware upgrade to 1.0.17-Solution
2023-05-28 05:14:45 - last edited 2023-05-28 05:14:55

Fyi I proceeded to manually update the firmware to 1.0.17 via the web ui of tpLink.

The update was carried out smoothly. Both packs were updated.

 

Still I would like to know why this was not done automatically via the android app, and was just saying that there is no update available.

 

 

Recommended Solution
  3  
  3  
#2
Options
2 Reply
Re:Deco X60 firmware upgrade to 1.0.17-Solution
2023-05-28 05:14:45 - last edited 2023-05-28 05:14:55

Fyi I proceeded to manually update the firmware to 1.0.17 via the web ui of tpLink.

The update was carried out smoothly. Both packs were updated.

 

Still I would like to know why this was not done automatically via the android app, and was just saying that there is no update available.

 

 

Recommended Solution
  3  
  3  
#2
Options
Re:Deco X60 firmware upgrade to 1.0.17
2023-05-29 09:37:03

  @madvinegar 

Hi, Welcome to the community.

For V3.2, normally It has its own support page on the official sites and did not share firmware with V3 and V3.6.

But for Deco X60 V3.2, it is a little bit different and it did share the same firmware with V3 and V3.6. So you could manually update to 1.0.17 via web UI. It is only required to do the firmware upgrade once and both X60 v3.2 could be updated to 1.0.17.

For more details, please refer to this link:

Update Deco

 

Thank you very much.

Best regards.

 

 

 

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1089

Replies: 2

Related Articles