AX mode can be accessed by non AX client?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX mode can be accessed by non AX client?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX mode can be accessed by non AX client?
AX mode can be accessed by non AX client?
2021-04-25 12:18:16
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: 1.1.5 Build 20201230 Rel. 40465(5553)

I have TP LINK AX 1500 in my house and one day I enabled 5GHz mode to only work with WiFi 6 (ax) protocol and also renamed it so I can differentiate between 5GHz and 2.4GHz SSID. And out of curiosity I open WiFi setting on my iPhone 6s (note that iPhone 6s doesnt support ax and the highest it goes only to ac protocol) to see whether or not my iPhone would detect WiFi 6 signal and I was surprised that my iPhone 6s not only can see my 5GHz ax signal but also can connect to it. What happened? Does TPLINK AX 1500 mix between WiFi 5 and WiFi 6 signal? but I'm pretty sure that on my router settings I set 5GHz to only work on ax mode or is there some hidden settings I dont know about? I cant yet verify the signal on my iPhone is indeed ax or ac signal because iPhone doesnt tell you which wireless protocol it connected to.

Does anyone have the same problem?

  0      
  0      
#1
Options
5 Reply
Re:AX mode can be accessed by non AX client?
2021-04-25 17:22:00

@crispybacon 

 

There is only one place to set the mode for 5 GHz, no hidden settings.

If the "Mode" is set to "802.11ax only", but non-AX-capable devices can still successfully connect, then this might be a bug in the router's firmware.

 

  0  
  0  
#2
Options
Re:AX mode can be accessed by non AX client?
2021-04-27 09:31:18

@crispybacon  Just to confirm, is the AX1500 working as the main router or as an access point? Is it the only 802.11ax network that your iPhone 6s connects to? As woozle already mentioned, this should not happen. Ensure you save the 5G settings successfully by rebooting the router, then check again to see if you can still connect to it.

 

BTW, what is the iOS version of the iPhone 6s?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:AX mode can be accessed by non AX client?
2021-04-27 17:23:20

@woozle I thought it might be a bug in the firmware or something too, but if it's really a bug TPLINK should update the firmware

  0  
  0  
#4
Options
Re:AX mode can be accessed by non AX client?
2021-04-27 17:27:34 - last edited 2021-04-27 17:33:04

@Kevin_Z I set my AX1500 as router and yes it's my only ax router in the house. Well I never really rebooted when I change the setting, I just clicked "Save" and there it was. I'll try and bring you update

 

EDIT: change the settings and then restarted. my iPhone still can connect to it. my iPhone run iOS 14.5

  0  
  0  
#5
Options
Re:AX mode can be accessed by non AX client?
2021-04-28 01:09:59

@crispybacon 

 

Did you disconnect from the network before you restart the router? Please remove the profile on the iPhone 6s first, then save the 802.11ax only and restart the router, try to connect to the 5G network again on the iPhone 6s.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1675

Replies: 5

Related Articles