New Release Onemesh Firmware for Archer AX10
Hello everyone,
The Onemesh firmware for Archer AX10 is now available, customers who own the router can update the firmware to enjoy the mesh network with the range extender/powerline extender.
Customers can check for the new firmware on the router web GUI or via the Tether app, they can also download the firmware from the TP-Link official website to upgrade the router manually.
Note: Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:
https://www.tp-link.com/support/faq/2509/
Release note for the firmware:
New Features/Enhancement:
1. Added OneMesh feature;
2. Updated IPTV Profile;
3. Added System Time feature on Tether App;
4. Added QoS Schedule feature;
5. Added a prompt when the negotiation rate of the WAN port is 100Mbps;
6. Optimized the Parental Control feature;
7. Added dual NAT detection and Internet Online time feature on Tether App;
8. Maximum number of clients on the single-band network increased to 128;
9. Added IPTV feature on Tether App;
10. Optimized the Client List;
11. The wireless default encryption method is modified to WPA2+AES.
Bug Fixed:
1. Fixed the FragAttacks vulnerabilities;
2. Fixed the bug that the router incorrectly blocked Internet requests;
3. Fixed the potential shell illegal injection risk of the read and write instructions of the tddp module;
4. Fixed the display error on Network Map page in some cases;
5. Fixed the bug that TKIP encryption was not supported under 11ax only mode;
6. Fixed the bug that Web UI cannot synchronize the operation of deleting UPNP entries;
7. Fixed the bug that the PPTP VPN server feature can't be enabled and the account can't be deleted in some cases;
8. Fixed the bug that the router failed to save system log in AP mode;
9. Fixed the bug that AX10-TDDP causes RCE vulnerabilities;
10. Fixed uhttpd Directory Traversal vulnerabilities;
11. Fixed the bug that Tether app failed to show the IP address in some cases;
12. Fixed the bug that the client type cannot be changed on the Tether App;
13. Fixed the bug that client icon can't be set to other on Tether App.
Do let the community know if there is an issue.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What if you disconnect the RE305 from the Onemesh network, and leave it disconnect from the network, how about the 5G connection of the router, is it working properly?
Please confirm what is the 5G signal strength at the same location before and after the firmware update, if the 5G signal is worse than before, try to run Wi-Fi analyzer and set a 5G channel with less congestion according to the test results. Then try to add the RE305 back to the network to confirm.
- Copy Link
- Report Inappropriate Content
After installing the new version of the update, every half an hour, Internet cuts began after a hard reset, the router has been operating in normal mode for a day.
- Copy Link
- Report Inappropriate Content
I am third day back on new fw.
But now it was updated by tether app, not manually by downloading fw from website.
Now everything works great!!!
So problem was updating by downloading fw.
- Copy Link
- Report Inappropriate Content
How did you update the firmware, via the local upgrade by downloading the firmware from the website, or via the Tether app automatically?
Try to reset the router to factory defaults, reconfigure it from scratch, then check if it connects to the internet stably. BTW, when the internet drops on the AX10, how about the Internet LED status, will it change to be orange? Who is your ISP?
- Copy Link
- Report Inappropriate Content
Glad to hear that the router is performing good after the firmware update via the Tether app. As for the issue caused by the previous update, I guess there might be something wrong with the local update, but we will not know what happens with that local update in your network.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I'm just about to sell my router now. The new firmware ruined my experience. I use parent control to close the internet for my kids for bedtime.. with this new update I can only set time by full hour (eg. 7.00, 8.00, 9.00) - with previous firmware I could set the time for like 9.30 pm. Without this feature the router will not be suitable for my needs anymore. I even changed from D-Link to TP-Link because of this specific feature.
- Copy Link
- Report Inappropriate Content
Do you mean the connection is stable now after you reset the router?
KaLGaNoff wrote
local update, after hard reset 2 days the flight is normal
- Copy Link
- Report Inappropriate Content
The Parental Control could have been optimized on the latest Onemesh firmware as per the release note.
5. Optimized the Parental Control feature;
- Copy Link
- Report Inappropriate Content
Yes.. however this is not an optimization. It is a degrading of feature. Optimizing means making an existing feature better.. not worse. At least the consequences of this "optimization" should have been described more precisely.. I'm very disappointed in TP-link and until this is fixed I will never recommend anyone to buy TP-Link again (working as an internet supporter for a large ISP in my country).
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 23735
Replies: 113
Voters 0
No one has voted for it yet.