New Release Onemesh Firmware for Archer AX10
Hello everyone,
The Onemesh firmware for Archer AX10 is now available, customers who own the router can update the firmware to enjoy the mesh network with the range extender/powerline extender.
Customers can check for the new firmware on the router web GUI or via the Tether app, they can also download the firmware from the TP-Link official website to upgrade the router manually.
Note: Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:
https://www.tp-link.com/support/faq/2509/
Release note for the firmware:
New Features/Enhancement:
1. Added OneMesh feature;
2. Updated IPTV Profile;
3. Added System Time feature on Tether App;
4. Added QoS Schedule feature;
5. Added a prompt when the negotiation rate of the WAN port is 100Mbps;
6. Optimized the Parental Control feature;
7. Added dual NAT detection and Internet Online time feature on Tether App;
8. Maximum number of clients on the single-band network increased to 128;
9. Added IPTV feature on Tether App;
10. Optimized the Client List;
11. The wireless default encryption method is modified to WPA2+AES.
Bug Fixed:
1. Fixed the FragAttacks vulnerabilities;
2. Fixed the bug that the router incorrectly blocked Internet requests;
3. Fixed the potential shell illegal injection risk of the read and write instructions of the tddp module;
4. Fixed the display error on Network Map page in some cases;
5. Fixed the bug that TKIP encryption was not supported under 11ax only mode;
6. Fixed the bug that Web UI cannot synchronize the operation of deleting UPNP entries;
7. Fixed the bug that the PPTP VPN server feature can't be enabled and the account can't be deleted in some cases;
8. Fixed the bug that the router failed to save system log in AP mode;
9. Fixed the bug that AX10-TDDP causes RCE vulnerabilities;
10. Fixed uhttpd Directory Traversal vulnerabilities;
11. Fixed the bug that Tether app failed to show the IP address in some cases;
12. Fixed the bug that the client type cannot be changed on the Tether App;
13. Fixed the bug that client icon can't be set to other on Tether App.
Do let the community know if there is an issue.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Check the Parental Control settings on the AX10, ensure this website is not in the blocked list.
Are there any other websites that cannot be accessed when connecting to the router? Can you access ys.mihoyo.com before the firmware update?
You can try to change the DNS servers on the AX10 Internet page to something like 8.8.8.8 and 8.8.4.4, then reboot the router, reconnect to the network to confirm.
BTW, who is your ISP? Check if you can access the website by connecting a computer directly to the ISP modem, just in case this is blocked by the Internet Provider.
- Copy Link
- Report Inappropriate Content
Hello @greenpower and all,
The new Onemesh official firmware for the Archer AX1500 v1 is also available now, please check for the updates on the router web GUI or Tether app in one day or two for the new update. You can also download the new firmware from TP-Link official website, and install it manually:
https://www.tp-link.com/support/download/archer-ax1500/v1/#Firmware
Note: You cannot downgrade to the previous firmware after you install this version of firmware.
- Copy Link
- Report Inappropriate Content
I'M not Open the Parental Control settings
i used to change the DNS servers on the AX10 Internet page to something like 8.8.8.8 and 8.8.4.4 but of no avail
i can access ys.mihoyo.com before the firmware update
Are there any other websites that cannot be accessed when connecting to the router? Yes My iPhone、Mac cannot be accessed China iCloud
use other The router Everything is all right
sorry I'm using a translator
- Copy Link
- Report Inappropriate Content
That is weird. Please try to clone the MAC address of the other router (which is working fine) to the AX10 as follows, then check again:
https://www.tp-link.com/support/faq/3023/
If the MAC clone still doesn't help, try to reset the AX10 to factory defaults, reconfigure it from scratch, then check if you can access the website.
May we confirm again who is your ISP?
- Copy Link
- Report Inappropriate Content
My ISP is Korea LG U+
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Please try to clone the MAC address of the other router (which is working fine) to the AX10 as follows, then check again:
https://www.tp-link.com/support/faq/3023/
If the MAC clone still doesn't help, try to reset the AX10 to factory defaults, reconfigure it from scratch, then check if you can access the website.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi. Ifailed to upgrade the firmware. I m using my isp ax10. And the unit as model Ax10(my). Can I change my firmware to the global type so that I can upgrade. And use the onemesh feature. Plan to buy re300.
- Copy Link
- Report Inappropriate Content
Archer AX10(MY) seems to be a customized version for the local market, you may not be allowed to upgrade to the global version, please wait for the new official release for it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 24202
Replies: 113
Voters 0
No one has voted for it yet.