Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > AX3000 can not access docker containers on LAN

< All Threads

AX3000 can not access docker containers on LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX3000 can not access docker containers on LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

bajzathd

2021-12-05 16:03:22 - last edited 2021-12-08 21:06:51

Posts: 3

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2021-12-05

AX3000 can not access docker containers on LAN

2021-12-05 16:03:22 - last edited 2021-12-08 21:06:51

Model: Archer AX3000

Hardware Version: V1

Firmware Version: 1.0.11

I can no longer access my Docker containers on LAN after changing my router - if I put back my old one, it works.

I have a "server" (192.168.1.40) where I host Docker containers with Docker for Windows, and I used to be able to access the containers on it from my LAN with ip and port (e.g. access Portainer on 192.168.1.40:9000). I tried to use telnet to check for the port, but it does not work with my new router, but if I change the router back to my old one, it successfully connects: telnet 192.168.1.40 9000

I can use Remote Desktop to connect to the server, but I can not access my Docker containers.

What setting should I modify to be able to access my containers? I even tried to factory reset the router and connect to the container on teh default DHCP IP, but it did not work.

1 Accepted Solution

Kevin_Z

2021-12-08 11:59:27 - last edited 2021-12-08 21:06:51

Posts: 21755

Helpful: 5136

Solutions: 2565

Stories: 21

Registered: 2018-12-24

Re:AX3000 can not access docker containers on LAN-Solution

2021-12-08 11:59:27 - last edited 2021-12-08 21:06:51

@bajzathd

Are you able to ping 192.168.0.40 from another PC/laptop in this network? Please check and confirm the firewall on Windows is disabled, I understand that there is nothing changed on Windows but there are cases that the firewall and network permission will change when you connect to a new network.

You can follow this guide to change the network to be private then confirm:

https://www.tp-link.com/support/faq/3072/

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

Recommended Solution

5 Reply

Kevin_Z

2021-12-06 08:19:30

Posts: 21755

Helpful: 5136

Solutions: 2565

Stories: 21

Registered: 2018-12-24

Re:AX3000 can not access docker containers on LAN

2021-12-06 08:19:30

@bajzathd

Please login to the web GUI of the AX3000 and confirm what is the LAN IP address, if it is 192.168.0.1, then you can try changing it to be in the same IP subnet as the Docker containers:

https://www.tp-link.com/support/faq/2013/

If you are sure the IP address of the Docker containers is 192.168.1.40, then change the LAN IP of the AX3000 to 192.168.1.1, then reboot to confirm.

bajzathd

LV1

2021-12-06 09:01:22

Posts: 3

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2021-12-05

Re:AX3000 can not access docker containers on LAN

2021-12-06 09:01:22

@Kevin_Z

Thank you for your response!

I am using 192.168.0.1 as my router IP, and 192.168.0.100-255 as my DHCP range (under 100 I am using static IPs).

The Docker containers are running on the 192.168.0.40 server in bridge network mode, so I am using its ports to reach the containers, but it only works with my old router.