Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > [TL-MR100] Incoming IPv6 connections not possible

< All Threads

Solution [TL-MR100] Incoming IPv6 connections not possible

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Solution [TL-MR100] Incoming IPv6 connections not possible

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Solution[TL-MR100] Incoming IPv6 connections not possible

vasanths

2022-01-09 11:58:02 - last edited 2022-09-06 09:06:29

Posts: 7

Helpful: 8

Solutions: 0

Stories: 0

Registered: 2022-01-09

[TL-MR100] Incoming IPv6 connections not possible

2022-01-09 11:58:02 - last edited 2022-09-06 09:06:29

Tags: #Highlighted Thread

Model: TL-MR100

Hardware Version: V1

Firmware Version: 1.4.0 0.9.1

Hi,

It seems the IPv6 is not correctly functioning in the TL-MR100. The outgoing connections are fine, ping to WAN IPv6 address is fine, but ping6 from an outside to a internal client in LAN with IPv6 address is not working. From the browser inside the client (a Linux PC) if I see the what is my IPv6 address, it is correctly showing IPv6 address assigned in the LAN.

Note that the same client (a Linux PC) if I connect via my android mobile with the same SIM card used in the TL-MR100 and do mobile tethering via USB, those IPv6 address are publicly reachable.

All the operators are moving towards IPv6 and the IPv4 is CGNAT so it is useless for any service forwarding. The IPv6 service access is somehow blocked by TL-MR100, kindly help, without this the purpose of this router for me is nothing.

Regards,

Vasanth

1 Accepted Solution

TP-Link

2022-01-24 02:03:23 - last edited 2022-01-24 02:04:06

Posts: 6831

Helpful: 3002

Solutions: 536

Stories: 28

Registered: 2018-07-23

[Solution][TL-MR100] Incoming IPv6 connections not possible-Solution

2022-01-24 02:03:23 - last edited 2022-01-24 02:04:06

@vasanths

Hi, Thank you very much for all your feedback.

The issues that ping IPV6 from an outside to an internal client in LAN with IPv6 address is not working might be related to the IPV6 firewall on TL-MR100 which is enabled by default. Currently, here Is a firmware that is able to fix this issue:

TL-MR100-v1-20220120

How to update the firmware

Then you could turn off or customize IPV6 firewall rules under Advanced>Security>IPV6 firewall.

Please @TP-Link and let me know whether it is working or not.

Thank you very much.

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!

Recommended Solution

6 Reply

panko

LV1

2022-01-10 10:21:11 - last edited 2022-01-10 10:22:02

Posts: 17

Helpful: 18

Solutions: 0

Stories: 0

Registered: 2021-09-13

Re:[TL-MR100] Incoming IPv6 connections not possible

2022-01-10 10:21:11 - last edited 2022-01-10 10:22:02

@vasanths I have exact same problem. Prefix delegation is not working as well in either RADVD or DHCPv6 server so I used a static site prefix. But its still not connecting the ipv6 with the internet. If you know about some budget friendly router that fully support ipv6 then please let me know. Many thanks

Also if you don't mind telling, which operator sim are you using?

Check out my question about same here

https://community.tp-link.com/en/home/forum/topic/520364