Not getting full speed with Archer T9UH V2 at 5GHz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Not getting full speed with Archer T9UH V2 at 5GHz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Not getting full speed with Archer T9UH V2 at 5GHz
Not getting full speed with Archer T9UH V2 at 5GHz
2022-01-13 15:26:06 - last edited 2022-01-14 10:20:18
Model: Adapter  
Hardware Version: V2
Firmware Version:

Hi,

 

I recently upgraded to 1000/100 Mbps, and unfortunately, I'm not getting that advertised "1.3 Gbps" over 5GHz WiFi.

 

The best I got was around 530 Mbps. Upload is fairly consistent at around 97 Mbps.

 

The router is FritzBox 6660.

 

Any tips, tricks, suggestions?

 

Thanks in advance.

  2      
  2      
#1
Options
1 Accepted Solution
Re:Not getting full speed with Archer T9UH V2 at 5GHz-Solution
2022-01-14 03:26:17 - last edited 2022-01-14 10:20:18

Hello @p3r02d3r0 

 

The advertised 1.3 Gbps is the Link Speed or Negotiated speed on the physical layer, and actual 5Ghz Wi-Fi speed could be 40%-60% of the Link speed and also limited by speed comes from router.  How to check the associated/link speed on a wireless client

 

Archer T9UH adapter supports 802.11ac, and to get the 1.3Gbp= 3*433Mbps maximum Wi-Fi Link speed on 5Ghz, it needs to work at 3* MIMO & 80Mhz. 

From your router model spec, it seems Fritz box modem supports 2* MIMO, so at best you should get 2*433Mbps WiFi link speed on 5Ghz. 

 

  • If the link speed is 866Mbps, then your actual speed seems to be reasonable.
  • If Link speed does not reach 866Mbps, try to  adjust Router 5Ghz settings to 80Mhz and see if that helps improve 5Ghz link speed.

 

Hope this helps clear things up. 

Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:Not getting full speed with Archer T9UH V2 at 5GHz-Solution
2022-01-14 03:26:17 - last edited 2022-01-14 10:20:18

Hello @p3r02d3r0 

 

The advertised 1.3 Gbps is the Link Speed or Negotiated speed on the physical layer, and actual 5Ghz Wi-Fi speed could be 40%-60% of the Link speed and also limited by speed comes from router.  How to check the associated/link speed on a wireless client

 

Archer T9UH adapter supports 802.11ac, and to get the 1.3Gbp= 3*433Mbps maximum Wi-Fi Link speed on 5Ghz, it needs to work at 3* MIMO & 80Mhz. 

From your router model spec, it seems Fritz box modem supports 2* MIMO, so at best you should get 2*433Mbps WiFi link speed on 5Ghz. 

 

  • If the link speed is 866Mbps, then your actual speed seems to be reasonable.
  • If Link speed does not reach 866Mbps, try to  adjust Router 5Ghz settings to 80Mhz and see if that helps improve 5Ghz link speed.

 

Hope this helps clear things up. 

Recommended Solution
  1  
  1  
#2
Options
Re:Not getting full speed with Archer T9UH V2 at 5GHz
2022-01-14 07:16:23

@Solla-topee thanks for replying. That makes sense.

 

Yes, the router has already been set to 5GHz/80MHz, and with the latest speedtest I'm getting 543.59 / 96.93. So, those speeds are reasonable?

 

Thanks

  2  
  2  
#3
Options
Re:Not getting full speed with Archer T9UH V2 at 5GHz
2022-01-14 10:20:10 - last edited 2022-01-14 10:20:52

Hello @p3r02d3r0 

It sounds like the case i mentioned above. Please check if 5Ghz Wi-Fi link speed is around 866Mbps, if so 500+Mbps actual Wi-Fi speed/ speed test is reasonable

 How to check the associated/link speed on a wireless client

 

 

  0  
  0  
#4
Options
Re:Not getting full speed with Archer T9UH V2 at 5GHz
2022-01-14 10:27:06

@Solla-topee Yep, seems like it.

 

 

Out of curiosity, is there a tweak to get more speed out of it? A repeater?

 

Thanks!

  0  
  0  
#5
Options

Information

Helpful: 2

Views: 1032

Replies: 4

Related Articles